This is the latest recevied telemetry packets stored in our database for station/object IZ4HZA-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1789236649 | 3.77 VDC | 0.84 VDC | 0 | 0 | 0 |
| 1789235748 | 3.83 VDC | 1 VDC | 0 | 0 | 0 |
| 1789233048 | 3.91 VDC | 0.98 VDC | 0 | 0 | 0 |
| 1789232148 | 3.93 VDC | 0.96 VDC | 0 | 0 | 0 |
| 1789231247 | 3.96 VDC | 0.98 VDC | 0 | 0 | 0 |
| 1789230347 | 3.98 VDC | 0.98 VDC | 0 | 0 | 0 |
| 1789229447 | 3.99 VDC | 0.96 VDC | 0 | 0 | 0 |
| 1789228547 | 4.01 VDC | 0.96 VDC | 0 | 0 | 0 |
| 1789227646 | 4.01 VDC | 0.96 VDC | 0 | 0 | 0 |
| 1789226746 | 4.03 VDC | 0.96 VDC | 0 | 0 | 0 |
| 1789225846 | 4.05 VDC | 0.96 VDC | 0 | 0 | 0 |
| 1789224946 | 4.07 VDC | 0.96 VDC | 0 | 0 | 0 |
| 1789224045 | 4.11 VDC | 0.8 VDC | 0 | 0 | 0 |
| 1789223145 | 4.15 VDC | 0.94 VDC | 0 | 0 | 0 |
| 1789222245 | 4.19 VDC | 0.94 VDC | 0 | 0 | 0 |
| 1789218644 | 4.14 VDC | 0.9 VDC | 0 | 0 | 0 |
| 1789217744 | 4.17 VDC | 0.92 VDC | 0 | 0 | 0 |
| 1789216843 | 4.16 VDC | 0.88 VDC | 0 | 0 | 0 |
| 1789215943 | 4.19 VDC | 0.9 VDC | 0 | 0 | 0 |
| 1789215043 | 4.17 VDC | 0.9 VDC | 0 | 0 | 0 |
| 1789214143 | 4.13 VDC | 0.9 VDC | 0 | 0 | 0 |
| 1789213243 | 4.11 VDC | 0.86 VDC | 0 | 0 | 0 |
| 1789212342 | 4.14 VDC | 0.92 VDC | 0 | 0 | 0 |
| 1789211442 | 4.19 VDC | 0.82 VDC | 0 | 0 | 0 |
| 1789210542 | 4.11 VDC | 0.86 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)