This is the latest recevied telemetry packets stored in our database for station/object IZ4HZA-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1789050687 | 3.96 VDC | 1 VDC | 0 | 0 | 0 |
| 1789049786 | 3.97 VDC | 1.02 VDC | 0 | 0 | 0 |
| 1789046186 | 3.52 VDC | 1.02 VDC | 0 | 0 | 0 |
| 1789045284 | 3.17 VDC | 0.76 VDC | 0 | 0 | 0 |
| 1789044635 | 3.2 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1789043735 | 3.45 VDC | 1.02 VDC | 0 | 0 | 0 |
| 1789042834 | 3.22 VDC | 0.9 VDC | 0 | 0 | 0 |
| 1789041726 | 3.54 VDC | 1.02 VDC | 0 | 0 | 0 |
| 1789040826 | 3.55 VDC | 1.04 VDC | 0 | 0 | 0 |
| 1789039925 | 3.42 VDC | 1.02 VDC | 0 | 0 | 0 |
| 1789039025 | 3.47 VDC | 1.04 VDC | 0 | 0 | 0 |
| 1789038125 | 3.52 VDC | 1.02 VDC | 0 | 0 | 0 |
| 1789037223 | 3.63 VDC | 0.96 VDC | 0 | 0 | 0 |
| 1789035079 | 3.34 VDC | 1.02 VDC | 0 | 0 | 0 |
| 1789032280 | 3.57 VDC | 0.72 VDC | 0 | 0 | 0 |
| 1789030275 | 3.35 VDC | 0.9 VDC | 0 | 0 | 0 |
| 1789027658 | 3.56 VDC | 0.96 VDC | 0 | 0 | 0 |
| 1789025187 | 3.45 VDC | 1 VDC | 0 | 0 | 0 |
| 1789024286 | 3.67 VDC | 1.02 VDC | 0 | 0 | 0 |
| 1788970967 | 3.47 VDC | 0.86 VDC | 0 | 0 | 0 |
| 1788968972 | 3.29 VDC | 0.9 VDC | 0 | 0 | 0 |
| 1788968072 | 3.67 VDC | 0.94 VDC | 0 | 0 | 0 |
| 1788967172 | 3.84 VDC | 0.76 VDC | 0 | 0 | 0 |
| 1788966272 | 3.91 VDC | 0.92 VDC | 0 | 0 | 0 |
| 1788965371 | 3.9 VDC | 0.94 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)