This is the latest recevied telemetry packets stored in our database for station/object SP6RTS-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1771201818 | 0 Count | 928 Count | 0 Count | 0 VDC | 0 VDC |
| 1771200917 | 0 Count | 917 Count | 0 Count | 0 VDC | 0 VDC |
| 1771200017 | 0 Count | 904 Count | 0 Count | 0 VDC | 0 VDC |
| 1771199116 | 0 Count | 895 Count | 0 Count | 0 VDC | 0 VDC |
| 1771198216 | 0 Count | 883 Count | 0 Count | 0 VDC | 0 VDC |
| 1771197316 | 0 Count | 873 Count | 0 Count | 0 VDC | 0 VDC |
| 1771196416 | 0 Count | 863 Count | 0 Count | 0 VDC | 0 VDC |
| 1771195516 | 0 Count | 854 Count | 0 Count | 0 VDC | 0 VDC |
| 1771194616 | 0 Count | 843 Count | 0 Count | 0 VDC | 0 VDC |
| 1771193717 | 0 Count | 834 Count | 0 Count | 0 VDC | 0 VDC |
| 1771192817 | 0 Count | 824 Count | 0 Count | 0 VDC | 0 VDC |
| 1771191917 | 0 Count | 814 Count | 0 Count | 0 VDC | 0 VDC |
| 1771191017 | 0 Count | 806 Count | 0 Count | 0 VDC | 0 VDC |
| 1771190117 | 0 Count | 796 Count | 0 Count | 0 VDC | 0 VDC |
| 1771189216 | 0 Count | 787 Count | 0 Count | 0 VDC | 0 VDC |
| 1771188316 | 0 Count | 777 Count | 0 Count | 0 VDC | 0 VDC |
| 1771187416 | 0 Count | 768 Count | 0 Count | 0 VDC | 0 VDC |
| 1771186516 | 0 Count | 758 Count | 0 Count | 0 VDC | 0 VDC |
| 1771185616 | 0 Count | 749 Count | 0 Count | 0 VDC | 0 VDC |
| 1771184716 | 0 Count | 739 Count | 0 Count | 0 VDC | 0 VDC |
| 1771183816 | 0 Count | 730 Count | 0 Count | 0 VDC | 0 VDC |
| 1771182916 | 0 Count | 720 Count | 0 Count | 0 VDC | 0 VDC |
| 1771182015 | 0 Count | 711 Count | 0 Count | 0 VDC | 0 VDC |
| 1771181115 | 0 Count | 702 Count | 0 Count | 0 VDC | 0 VDC |
| 1771180215 | 0 Count | 695 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)