EA2RCF LoRa APRS MAP Backup

My position About Go to MAIN map Powered by EA2RCF Radioclub Foronda ☰

reset

SP6PTT Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SP6PTT. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	TX*	RX*	Digi*
1789234091	72 Count	352 Count	68 Count
1789232290	30 Count	173 Count	27 Count
1789230490	186 Count	1043 Count	142 Count
1789228689	166 Count	904 Count	123 Count
1789226896	146 Count	772 Count	104 Count
1789225096	126 Count	651 Count	85 Count
1789223295	105 Count	525 Count	65 Count
1789221494	89 Count	401 Count	50 Count
1789219693	72 Count	273 Count	34 Count
1789217893	46 Count	152 Count	18 Count
1789216091	240 Count	1098 Count	140 Count
1789214291	212 Count	960 Count	124 Count
1789212490	176 Count	824 Count	103 Count
1789210689	139 Count	688 Count	79 Count
1789208888	91 Count	529 Count	49 Count
1789207088	46 Count	242 Count	22 Count
1789205295	242 Count	1079 Count	172 Count
1789203495	202 Count	897 Count	147 Count
1789201694	164 Count	716 Count	125 Count
1789199893	123 Count	538 Count	102 Count
1789198092	71 Count	294 Count	67 Count
1789196292	213 Count	1069 Count	205 Count
1789194491	155 Count	805 Count	149 Count
1789192690	99 Count	514 Count	94 Count
1789190889	51 Count	271 Count	50 Count

*Used Equation Coefficients:

TX: 0, 1, 0

RX: 0, 1, 0

Digi: 0, 1, 0

V_Bat: 0, 0.01, 0

V_Ext: 0, 0.02, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)