This is the latest recevied telemetry packets stored in our database for station/object IW7BIN-5. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1769941882 | 4.15 VDC | 32.14 VDC | 0 | 0 | 0 |
| 1769940082 | 4.15 VDC | 32.14 VDC | 0 | 0 | 0 |
| 1769939182 | 4.15 VDC | 32.14 VDC | 0 | 0 | 0 |
| 1769938282 | 4.15 VDC | 32.14 VDC | 0 | 0 | 0 |
| 1769937382 | 4.15 VDC | 32.14 VDC | 0 | 0 | 0 |
| 1769936482 | 4.15 VDC | 32.14 VDC | 0 | 0 | 0 |
| 1769935582 | 4.15 VDC | 27.48 VDC | 0 | 0 | 0 |
| 1769934682 | 4.15 VDC | 16 VDC | 0 | 0 | 0 |
| 1769933782 | 4.15 VDC | 15.68 VDC | 0 | 0 | 0 |
| 1769932882 | 4.15 VDC | 14.76 VDC | 0 | 0 | 0 |
| 1769931982 | 4.15 VDC | 13.52 VDC | 0 | 0 | 0 |
| 1769931083 | 4.15 VDC | 15.38 VDC | 0 | 0 | 0 |
| 1769930182 | 4.15 VDC | 12.28 VDC | 0 | 0 | 0 |
| 1769929282 | 4.15 VDC | 29.34 VDC | 0 | 0 | 0 |
| 1769928382 | 4.15 VDC | 32.14 VDC | 0 | 0 | 0 |
| 1769927482 | 4.15 VDC | 32.14 VDC | 0 | 0 | 0 |
| 1769926582 | 4.15 VDC | 32.14 VDC | 0 | 0 | 0 |
| 1769925682 | 4.15 VDC | 32.14 VDC | 0 | 0 | 0 |
| 1769924782 | 4.15 VDC | 32.14 VDC | 0 | 0 | 0 |
| 1769923882 | 4.15 VDC | 32.14 VDC | 0 | 0 | 0 |
| 1769922982 | 4.15 VDC | 32.14 VDC | 0 | 0 | 0 |
| 1769922082 | 4.15 VDC | 18.8 VDC | 0 | 0 | 0 |
| 1769921182 | 4.15 VDC | 23.76 VDC | 0 | 0 | 0 |
| 1769920282 | 4.16 VDC | 13.52 VDC | 0 | 0 | 0 |
| 1769919382 | 4.16 VDC | 13.2 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)