This is the latest recevied telemetry packets stored in our database for station/object WB5PJB-7. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Celsius* | Rel_Hum* | Atm_Press* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1781823261 | 36 C | 12.88 % | 0 hPa | 0 | 0 |
| 1781823102 | 36.2 C | 12.64 % | 0 hPa | 0 | 0 |
| 1781822948 | 36.7 C | 12.5 % | 0 hPa | 0 | 0 |
| 1781822627 | 38.1 C | 11.41 % | 0 hPa | 0 | 0 |
| 1781822146 | 41.4 C | 11.55 % | 0 hPa | 0 | 0 |
| 1781821878 | 42.7 C | 10.45 % | 0 hPa | 0 | 0 |
| 1781821690 | 43.3 C | 12.48 % | 817.13 hPa | 0 | 0 |
| 1781809749 | 33.3 C | 16.08 % | 0 hPa | 0 | 0 |
| 1781809573 | 33.3 C | 16.23 % | 0 hPa | 0 | 0 |
| 1781809038 | 33.3 C | 15.09 % | 0 hPa | 0 | 0 |
| 1781808703 | 33.6 C | 17.17 % | 0 hPa | 0 | 0 |
| 1781808228 | 33 C | 19.07 % | 828.38 hPa | 0 | 0 |
| 1781807125 | 30.5 C | 17.96 % | 0 hPa | 0 | 0 |
| 1781806696 | 30 C | 20.59 % | 0 hPa | 0 | 0 |
| 1781806415 | 29.7 C | 22.89 % | 820.63 hPa | 0 | 0 |
| 1781789369 | 23.7 C | 23.45 % | 0 hPa | 0 | 0 |
| 1781789160 | 23.9 C | 22.84 % | 0 hPa | 0 | 0 |
| 1781788959 | 24 C | 22.94 % | 0 hPa | 0 | 0 |
| 1781788646 | 24.3 C | 22.67 % | 0 hPa | 0 | 0 |
| 1781788469 | 24.4 C | 22.59 % | 0 hPa | 0 | 0 |
| 1781788228 | 24.6 C | 22.15 % | 799.5 hPa | 0 | 0 |
*Used Equation Coefficients:
Celsius: 0, 0.1, -50
Rel_Hum: 0, 0.01, 0
Atm_Press: 0, 0.125, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)