This is the latest recevied telemetry packets stored in our database for station/object OK1VIG-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1769953503 | 591 Count | 238 Count | 108 Count | 4.24 VDC | 0.14 VDC |
| 1769951698 | 590 Count | 238 Count | 108 Count | 4.22 VDC | 0.14 VDC |
| 1769949893 | 589 Count | 237 Count | 108 Count | 4.19 VDC | 0.14 VDC |
| 1769948088 | 588 Count | 229 Count | 108 Count | 4.21 VDC | 0.14 VDC |
| 1769946282 | 586 Count | 217 Count | 107 Count | 4.23 VDC | 0.14 VDC |
| 1769944477 | 584 Count | 216 Count | 106 Count | 4.2 VDC | 0.14 VDC |
| 1769942672 | 582 Count | 215 Count | 105 Count | 4.25 VDC | 0.14 VDC |
| 1769940867 | 581 Count | 215 Count | 105 Count | 4.19 VDC | 0.14 VDC |
| 1769939061 | 580 Count | 215 Count | 105 Count | 4.23 VDC | 0.14 VDC |
| 1769937256 | 579 Count | 215 Count | 105 Count | 4.22 VDC | 0.14 VDC |
| 1769935451 | 575 Count | 212 Count | 102 Count | 4.23 VDC | 0.14 VDC |
| 1769933709 | 574 Count | 212 Count | 102 Count | 4.2 VDC | 0.14 VDC |
| 1769931904 | 573 Count | 212 Count | 102 Count | 4.22 VDC | 0.14 VDC |
| 1769930099 | 572 Count | 212 Count | 102 Count | 4.2 VDC | 0.14 VDC |
| 1769928293 | 571 Count | 212 Count | 102 Count | 4.22 VDC | 0.14 VDC |
| 1769926488 | 570 Count | 212 Count | 102 Count | 4.25 VDC | 0.14 VDC |
| 1769924682 | 569 Count | 212 Count | 102 Count | 4.24 VDC | 0.14 VDC |
| 1769922877 | 568 Count | 212 Count | 102 Count | 4.21 VDC | 0.14 VDC |
| 1769921072 | 567 Count | 212 Count | 102 Count | 4.26 VDC | 0.14 VDC |
| 1769919266 | 566 Count | 212 Count | 102 Count | 4.22 VDC | 0.14 VDC |
| 1769917461 | 565 Count | 212 Count | 102 Count | 4.26 VDC | 0.14 VDC |
| 1769915656 | 564 Count | 212 Count | 102 Count | 4.25 VDC | 0.14 VDC |
| 1769913851 | 563 Count | 212 Count | 102 Count | 4.21 VDC | 0.14 VDC |
| 1769912108 | 562 Count | 212 Count | 102 Count | 4.26 VDC | 0.14 VDC |
| 1769910303 | 561 Count | 212 Count | 102 Count | 4.2 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)