This is the latest recevied telemetry packets stored in our database for station/object IT9CYW-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Celsius* | Rel_Hum* | Atm_Press* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1769616842 | 23.8 C | 45.27 % | 1004.75 hPa | 0 | 0 |
| 1769616780 | 23.7 C | 45.33 % | 1004.63 hPa | 0 | 0 |
| 1769616748 | 23.7 C | 45.13 % | 1005.25 hPa | 0 | 0 |
| 1769616692 | 23.6 C | 45.36 % | 1004.5 hPa | 0 | 0 |
| 1769616638 | 23.5 C | 45.15 % | 1004.63 hPa | 0 | 0 |
| 1769616606 | 23.5 C | 45.15 % | 1004.63 hPa | 0 | 0 |
| 1769616566 | 23.5 C | 44.81 % | 1003.25 hPa | 0 | 0 |
| 1769616541 | 23.5 C | 44.81 % | 1004 hPa | 0 | 0 |
| 1769616296 | 23.6 C | 45.15 % | 1008.5 hPa | 0 | 0 |
| 1769616276 | 23.6 C | 45.09 % | 1015.88 hPa | 0 | 0 |
| 1769616236 | 23.6 C | 45.09 % | 1006.63 hPa | 0 | 0 |
| 1769616220 | 23.6 C | 45.09 % | 1004.75 hPa | 0 | 0 |
| 1769616201 | 23.6 C | 45.1 % | 1004.63 hPa | 0 | 0 |
| 1769616182 | 23.6 C | 45.1 % | 1004.63 hPa | 0 | 0 |
| 1769616134 | 23.5 C | 45.21 % | 1006.25 hPa | 0 | 0 |
| 1769615439 | 22.9 C | 48.52 % | 1005.88 hPa | 0 | 0 |
| 1769615424 | 22.8 C | 49.17 % | 1006 hPa | 0 | 0 |
| 1769615408 | 22.8 C | 49.17 % | 1005.38 hPa | 0 | 0 |
| 1769615375 | 22.8 C | 49.17 % | 1006 hPa | 0 | 0 |
| 1769615344 | 22.6 C | 49.07 % | 1006.38 hPa | 0 | 0 |
| 1769615328 | 22.6 C | 49.07 % | 1006.5 hPa | 0 | 0 |
| 1769615291 | 22.3 C | 49.7 % | 1006.75 hPa | 0 | 0 |
| 1769615239 | 22.1 C | 49.24 % | 1005.5 hPa | 0 | 0 |
| 1769615189 | 22.1 C | 49.24 % | 1001.75 hPa | 0 | 0 |
| 1769581400 | 22.3 C | 53.04 % | 1004.88 hPa | 0 | 0 |
*Used Equation Coefficients:
Celsius: 0, 0.1, -50
Rel_Hum: 0, 0.01, 0
Atm_Press: 0, 0.125, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)