This is the latest recevied telemetry packets stored in our database for station/object SP6RTS-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1792888380 | 0 Count | 404 Count | 0 Count | 0 VDC | 0 VDC |
| 1792887480 | 0 Count | 374 Count | 0 Count | 0 VDC | 0 VDC |
| 1792886580 | 0 Count | 338 Count | 0 Count | 0 VDC | 0 VDC |
| 1792885680 | 0 Count | 299 Count | 0 Count | 0 VDC | 0 VDC |
| 1792884780 | 0 Count | 270 Count | 0 Count | 0 VDC | 0 VDC |
| 1792883880 | 0 Count | 237 Count | 0 Count | 0 VDC | 0 VDC |
| 1792882979 | 0 Count | 207 Count | 0 Count | 0 VDC | 0 VDC |
| 1792882079 | 0 Count | 168 Count | 0 Count | 0 VDC | 0 VDC |
| 1792881179 | 0 Count | 138 Count | 0 Count | 0 VDC | 0 VDC |
| 1792880279 | 0 Count | 103 Count | 0 Count | 0 VDC | 0 VDC |
| 1792879379 | 0 Count | 68 Count | 0 Count | 0 VDC | 0 VDC |
| 1792878480 | 0 Count | 35 Count | 0 Count | 0 VDC | 0 VDC |
| 1792877580 | 0 Count | 1006 Count | 0 Count | 0 VDC | 0 VDC |
| 1792876680 | 0 Count | 975 Count | 0 Count | 0 VDC | 0 VDC |
| 1792875780 | 0 Count | 942 Count | 0 Count | 0 VDC | 0 VDC |
| 1792874880 | 0 Count | 910 Count | 0 Count | 0 VDC | 0 VDC |
| 1792873979 | 0 Count | 874 Count | 0 Count | 0 VDC | 0 VDC |
| 1792873079 | 0 Count | 842 Count | 0 Count | 0 VDC | 0 VDC |
| 1792872179 | 0 Count | 810 Count | 0 Count | 0 VDC | 0 VDC |
| 1792871279 | 0 Count | 780 Count | 0 Count | 0 VDC | 0 VDC |
| 1792870379 | 0 Count | 750 Count | 0 Count | 0 VDC | 0 VDC |
| 1792869479 | 0 Count | 718 Count | 0 Count | 0 VDC | 0 VDC |
| 1792868579 | 0 Count | 680 Count | 0 Count | 0 VDC | 0 VDC |
| 1792867679 | 0 Count | 622 Count | 0 Count | 0 VDC | 0 VDC |
| 1792866778 | 0 Count | 578 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)