This is the latest recevied telemetry packets stored in our database for station/object YE3ESW-8. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Hum* | Pres* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1789182903 | 35 °C | 43 %RH | 1014 hPa | 0 | 0 |
| 1789181424 | 34 °C | 44 %RH | 1014 hPa | 0 | 0 |
| 1789179524 | 34 °C | 44 %RH | 1014 hPa | 0 | 0 |
| 1789177624 | 34 °C | 43 %RH | 1014 hPa | 0 | 0 |
| 1789175724 | 34 °C | 40 %RH | 1014 hPa | 0 | 0 |
| 1789173824 | 34 °C | 40 %RH | 1014 hPa | 0 | 0 |
| 1789171925 | 34 °C | 38 %RH | 1014 hPa | 0 | 0 |
| 1789170025 | 34 °C | 38 %RH | 1014 hPa | 0 | 0 |
| 1789168125 | 33 °C | 37 %RH | 1013 hPa | 0 | 0 |
| 1789166225 | 33 °C | 37 %RH | 1013 hPa | 0 | 0 |
| 1789164325 | 32 °C | 31 %RH | 1012 hPa | 0 | 0 |
| 1789162425 | 32 °C | 31 %RH | 1012 hPa | 0 | 0 |
| 1789160525 | 32 °C | 32 %RH | 1012 hPa | 0 | 0 |
| 1789158625 | 33 °C | 32 %RH | 1012 hPa | 0 | 0 |
| 1789156725 | 33 °C | 35 %RH | 1012 hPa | 0 | 0 |
| 1789154825 | 34 °C | 41 %RH | 1011 hPa | 0 | 0 |
| 1789152925 | 34 °C | 40 %RH | 1012 hPa | 0 | 0 |
| 1789151025 | 33 °C | 38 %RH | 1012 hPa | 0 | 0 |
| 1789149125 | 33 °C | 36 %RH | 1012 hPa | 0 | 0 |
| 1789147225 | 33 °C | 32 %RH | 1013 hPa | 0 | 0 |
| 1789145325 | 32 °C | 31 %RH | 1013 hPa | 0 | 0 |
| 1789143425 | 33 °C | 31 %RH | 1013 hPa | 0 | 0 |
| 1789141525 | 33 °C | 31 %RH | 1013 hPa | 0 | 0 |
| 1789139625 | 33 °C | 32 %RH | 1013 hPa | 0 | 0 |
| 1789138188 | 33 °C | 33 %RH | 1013 hPa | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 1, 0
Hum: 0, 1, 0
Pres: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)