This is the latest recevied telemetry packets stored in our database for station/object SQ2MTG-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1789250293 | 46 Count | 89 Count | 34 Count | 4.2 VDC | 0 VDC |
| 1789249392 | 41 Count | 79 Count | 30 Count | 4.19 VDC | 0 VDC |
| 1789248491 | 35 Count | 66 Count | 25 Count | 4.2 VDC | 0 VDC |
| 1789247589 | 31 Count | 61 Count | 22 Count | 4.2 VDC | 0 VDC |
| 1789246688 | 24 Count | 47 Count | 16 Count | 4.2 VDC | 0 VDC |
| 1789245788 | 19 Count | 39 Count | 12 Count | 4.19 VDC | 0 VDC |
| 1789244887 | 14 Count | 29 Count | 8 Count | 4.19 VDC | 0 VDC |
| 1789243986 | 10 Count | 17 Count | 5 Count | 4.2 VDC | 0 VDC |
| 1789243085 | 4 Count | 1 Count | 0 Count | 4.2 VDC | 0 VDC |
| 1789189514 | 433 Count | 1004 Count | 375 Count | 4.2 VDC | 0 VDC |
| 1789188795 | 416 Count | 971 Count | 361 Count | 4.2 VDC | 0 VDC |
| 1789188795 | 422 Count | 980 Count | 366 Count | 4.2 VDC | 0 VDC |
| 1789188613 | 428 Count | 991 Count | 371 Count | 4.2 VDC | 0 VDC |
| 1789187713 | 422 Count | 980 Count | 366 Count | 4.2 VDC | 0 VDC |
| 1789186812 | 416 Count | 971 Count | 361 Count | 4.2 VDC | 0 VDC |
| 1789185911 | 412 Count | 961 Count | 358 Count | 4.2 VDC | 0 VDC |
| 1789185010 | 405 Count | 948 Count | 352 Count | 4.2 VDC | 0 VDC |
| 1789184109 | 401 Count | 931 Count | 349 Count | 4.2 VDC | 0 VDC |
| 1789183209 | 395 Count | 915 Count | 344 Count | 4.2 VDC | 0 VDC |
| 1789182308 | 389 Count | 891 Count | 339 Count | 4.2 VDC | 0 VDC |
| 1789181407 | 381 Count | 870 Count | 332 Count | 4.2 VDC | 0 VDC |
| 1789180506 | 374 Count | 850 Count | 326 Count | 4.2 VDC | 0 VDC |
| 1789179605 | 366 Count | 824 Count | 319 Count | 4.2 VDC | 0 VDC |
| 1789178725 | 358 Count | 806 Count | 316 Count | 4.2 VDC | 0 VDC |
| 1789177824 | 350 Count | 788 Count | 309 Count | 4.2 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)