This is the latest recevied telemetry packets stored in our database for station/object SQ2MTG-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1777366535 | 415 Count | 826 Count | 344 Count | 4.11 VDC | 0 VDC |
| 1777365635 | 409 Count | 816 Count | 339 Count | 4.11 VDC | 0 VDC |
| 1777364734 | 402 Count | 804 Count | 333 Count | 4.11 VDC | 0 VDC |
| 1777363833 | 396 Count | 792 Count | 328 Count | 4.11 VDC | 0 VDC |
| 1777362932 | 391 Count | 779 Count | 324 Count | 4.11 VDC | 0 VDC |
| 1777362031 | 385 Count | 770 Count | 319 Count | 4.11 VDC | 0 VDC |
| 1777361130 | 379 Count | 760 Count | 314 Count | 4.11 VDC | 0 VDC |
| 1777360230 | 373 Count | 750 Count | 309 Count | 4.11 VDC | 0 VDC |
| 1777359329 | 368 Count | 739 Count | 305 Count | 4.11 VDC | 0 VDC |
| 1777358428 | 362 Count | 726 Count | 300 Count | 4.11 VDC | 0 VDC |
| 1777357527 | 356 Count | 712 Count | 295 Count | 4.11 VDC | 0 VDC |
| 1777356646 | 343 Count | 697 Count | 287 Count | 4.11 VDC | 0 VDC |
| 1777355745 | 337 Count | 684 Count | 282 Count | 4.11 VDC | 0 VDC |
| 1777354844 | 328 Count | 671 Count | 274 Count | 4.11 VDC | 0 VDC |
| 1777353943 | 322 Count | 662 Count | 269 Count | 4.11 VDC | 0 VDC |
| 1777353043 | 310 Count | 645 Count | 258 Count | 4.11 VDC | 0 VDC |
| 1777352142 | 304 Count | 633 Count | 253 Count | 4.11 VDC | 0 VDC |
| 1777351241 | 296 Count | 620 Count | 246 Count | 4.11 VDC | 0 VDC |
| 1777350340 | 289 Count | 608 Count | 240 Count | 4.11 VDC | 0 VDC |
| 1777349439 | 282 Count | 597 Count | 234 Count | 4.11 VDC | 0 VDC |
| 1777348537 | 276 Count | 577 Count | 229 Count | 4.11 VDC | 0 VDC |
| 1777347637 | 267 Count | 542 Count | 221 Count | 4.11 VDC | 0 VDC |
| 1777346736 | 260 Count | 493 Count | 215 Count | 4.11 VDC | 0 VDC |
| 1777345835 | 252 Count | 447 Count | 208 Count | 4.11 VDC | 0 VDC |
| 1777344934 | 247 Count | 436 Count | 204 Count | 4.11 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)