This is the latest recevied telemetry packets stored in our database for station/object YB0RWN. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp.* | Humidity* | Pressure* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1777704114 | 43 °C | 27 %RH | 1005 hPa | 0 | 0 |
| 1777702264 | 40 °C | 29 %RH | 1005 hPa | 0 | 0 |
| 1777700414 | 41 °C | 29 %RH | 1006 hPa | 0 | 0 |
| 1777698564 | 42 °C | 28 %RH | 1006 hPa | 0 | 0 |
| 1777696714 | 41 °C | 29 %RH | 1007 hPa | 0 | 0 |
| 1777694864 | 41 °C | 29 %RH | 1008 hPa | 0 | 0 |
| 1777693014 | 41 °C | 30 %RH | 1008 hPa | 0 | 0 |
| 1777691164 | 41 °C | 31 %RH | 1008 hPa | 0 | 0 |
| 1777689314 | 41 °C | 34 %RH | 1008 hPa | 0 | 0 |
| 1777687464 | 40 °C | 36 %RH | 1008 hPa | 0 | 0 |
| 1777685614 | 39 °C | 38 %RH | 1008 hPa | 0 | 0 |
| 1777683764 | 38 °C | 41 %RH | 1008 hPa | 0 | 0 |
| 1777681914 | 35 °C | 43 %RH | 1007 hPa | 0 | 0 |
| 1777680064 | 32 °C | 44 %RH | 1007 hPa | 0 | 0 |
| 1777678214 | 29 °C | 47 %RH | 1006 hPa | 0 | 0 |
| 1777676364 | 28 °C | 47 %RH | 1006 hPa | 0 | 0 |
| 1777674514 | 28 °C | 47 %RH | 1006 hPa | 0 | 0 |
| 1777672664 | 28 °C | 47 %RH | 1006 hPa | 0 | 0 |
| 1777670814 | 28 °C | 47 %RH | 1006 hPa | 0 | 0 |
| 1777668964 | 29 °C | 47 %RH | 1006 hPa | 0 | 0 |
| 1777667115 | 29 °C | 46 %RH | 1006 hPa | 0 | 0 |
| 1777665265 | 29 °C | 45 %RH | 1006 hPa | 0 | 0 |
| 1777663414 | 29 °C | 45 %RH | 1006 hPa | 0 | 0 |
| 1777661565 | 29 °C | 46 %RH | 1006 hPa | 0 | 0 |
| 1777659714 | 29 °C | 45 %RH | 1006 hPa | 0 | 0 |
*Used Equation Coefficients:
Temp.: 0, 1, 0
Humidity: 0, 1, 0
Pressure: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)