This is the latest recevied telemetry packets stored in our database for station/object YO2LDK-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Voltage* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1773593652 | 2.95 VDC | 0 | 0 | 0 | 0 |
| 1773593499 | 3.03 VDC | 0 | 0 | 0 | 0 |
| 1773593346 | 3.09 VDC | 0 | 0 | 0 | 0 |
| 1773593295 | 3.1 VDC | 0 | 0 | 0 | 0 |
| 1773592785 | 3.22 VDC | 0 | 0 | 0 | 0 |
| 1773592734 | 3.22 VDC | 0 | 0 | 0 | 0 |
| 1773592632 | 3.24 VDC | 0 | 0 | 0 | 0 |
| 1773592530 | 3.24 VDC | 0 | 0 | 0 | 0 |
| 1773592173 | 3.29 VDC | 0 | 0 | 0 | 0 |
| 1773591510 | 3.34 VDC | 0 | 0 | 0 | 0 |
| 1773591255 | 3.36 VDC | 0 | 0 | 0 | 0 |
| 1773590745 | 3.38 VDC | 0 | 0 | 0 | 0 |
| 1773590643 | 3.39 VDC | 0 | 0 | 0 | 0 |
| 1773590439 | 3.38 VDC | 0 | 0 | 0 | 0 |
| 1773590235 | 3.41 VDC | 0 | 0 | 0 | 0 |
| 1773590082 | 3.42 VDC | 0 | 0 | 0 | 0 |
| 1773589827 | 3.42 VDC | 0 | 0 | 0 | 0 |
| 1773588450 | 3.46 VDC | 0 | 0 | 0 | 0 |
| 1773587073 | 3.5 VDC | 0 | 0 | 0 | 0 |
| 1773586155 | 3.52 VDC | 0 | 0 | 0 | 0 |
| 1773586053 | 3.53 VDC | 0 | 0 | 0 | 0 |
| 1773585434 | 3.54 VDC | 0 | 0 | 0 | 0 |
| 1773585383 | 3.54 VDC | 0 | 0 | 0 | 0 |
| 1773583700 | 3.56 VDC | 0 | 0 | 0 | 0 |
| 1773582425 | 3.59 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
Voltage: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)