This is the latest recevied telemetry packets stored in our database for station/object DO7SRB-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1773711005 | 238 Count | 531 Count | 163 Count | 4.5 VDC | 0.14 VDC |
| 1773709200 | 235 Count | 525 Count | 161 Count | 4.49 VDC | 0.14 VDC |
| 1773707417 | 232 Count | 517 Count | 159 Count | 4.54 VDC | 0.14 VDC |
| 1773705589 | 229 Count | 510 Count | 157 Count | 4.45 VDC | 0.14 VDC |
| 1773703837 | 226 Count | 501 Count | 155 Count | 4.5 VDC | 0.14 VDC |
| 1773702032 | 224 Count | 497 Count | 154 Count | 4.55 VDC | 0.14 VDC |
| 1773700227 | 222 Count | 492 Count | 153 Count | 4.51 VDC | 0.14 VDC |
| 1773698421 | 219 Count | 486 Count | 151 Count | 4.49 VDC | 0.14 VDC |
| 1773696616 | 216 Count | 479 Count | 149 Count | 4.4 VDC | 0.14 VDC |
| 1773694811 | 213 Count | 471 Count | 147 Count | 4.51 VDC | 0.14 VDC |
| 1773693006 | 211 Count | 465 Count | 146 Count | 4.55 VDC | 0.14 VDC |
| 1773691200 | 208 Count | 459 Count | 144 Count | 4.54 VDC | 0.14 VDC |
| 1773689395 | 206 Count | 450 Count | 143 Count | 4.49 VDC | 0.14 VDC |
| 1773687599 | 203 Count | 440 Count | 141 Count | 4.48 VDC | 0.14 VDC |
| 1773685794 | 201 Count | 434 Count | 140 Count | 4.43 VDC | 0.14 VDC |
| 1773683988 | 198 Count | 426 Count | 138 Count | 4.48 VDC | 0.14 VDC |
| 1773682237 | 195 Count | 418 Count | 136 Count | 4.39 VDC | 0.14 VDC |
| 1773680431 | 192 Count | 408 Count | 134 Count | 4.47 VDC | 0.14 VDC |
| 1773678625 | 191 Count | 402 Count | 134 Count | 4.5 VDC | 0.14 VDC |
| 1773676820 | 188 Count | 394 Count | 132 Count | 4.43 VDC | 0.14 VDC |
| 1773675017 | 162 Count | 361 Count | 107 Count | 4.43 VDC | 0.14 VDC |
| 1773673210 | 159 Count | 330 Count | 105 Count | 4.51 VDC | 0.14 VDC |
| 1773671404 | 156 Count | 311 Count | 103 Count | 4.4 VDC | 0.14 VDC |
| 1773669599 | 153 Count | 303 Count | 101 Count | 4.44 VDC | 0.14 VDC |
| 1773667794 | 150 Count | 298 Count | 99 Count | 4.49 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)