This is the latest recevied telemetry packets stored in our database for station/object DO7SRB-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1781176835 | 758 Count | 745 Count | 725 Count | 4.47 VDC | 0.14 VDC |
| 1781175030 | 740 Count | 728 Count | 708 Count | 4.42 VDC | 0.14 VDC |
| 1781173225 | 725 Count | 712 Count | 694 Count | 4.41 VDC | 0.14 VDC |
| 1781171419 | 710 Count | 698 Count | 680 Count | 4.45 VDC | 0.14 VDC |
| 1781169614 | 701 Count | 688 Count | 672 Count | 4.41 VDC | 0.14 VDC |
| 1781167809 | 686 Count | 673 Count | 658 Count | 4.53 VDC | 0.14 VDC |
| 1781166003 | 671 Count | 659 Count | 644 Count | 4.44 VDC | 0.14 VDC |
| 1781164263 | 655 Count | 642 Count | 629 Count | 4.53 VDC | 0.14 VDC |
| 1781162457 | 631 Count | 618 Count | 606 Count | 4.51 VDC | 0.14 VDC |
| 1781160651 | 613 Count | 599 Count | 589 Count | 4.49 VDC | 0.14 VDC |
| 1781158846 | 598 Count | 584 Count | 575 Count | 4.39 VDC | 0.14 VDC |
| 1781157037 | 577 Count | 563 Count | 555 Count | 4.47 VDC | 0.14 VDC |
| 1781155231 | 553 Count | 540 Count | 532 Count | 4.47 VDC | 0.14 VDC |
| 1781153426 | 528 Count | 515 Count | 508 Count | 4.48 VDC | 0.14 VDC |
| 1781151621 | 500 Count | 488 Count | 481 Count | 4.43 VDC | 0.14 VDC |
| 1781149815 | 472 Count | 461 Count | 454 Count | 4.48 VDC | 0.14 VDC |
| 1781148010 | 445 Count | 435 Count | 428 Count | 4.48 VDC | 0.14 VDC |
| 1781146205 | 419 Count | 410 Count | 403 Count | 4.47 VDC | 0.14 VDC |
| 1781144400 | 399 Count | 391 Count | 384 Count | 4.42 VDC | 0.14 VDC |
| 1781130023 | 200 Count | 196 Count | 193 Count | 4.5 VDC | 0.14 VDC |
| 1781128218 | 173 Count | 168 Count | 167 Count | 4.49 VDC | 0.14 VDC |
| 1781121059 | 71 Count | 70 Count | 69 Count | 4.51 VDC | 0.14 VDC |
| 1781119254 | 43 Count | 43 Count | 42 Count | 4.43 VDC | 0.14 VDC |
| 1781117448 | 21 Count | 22 Count | 21 Count | 4.43 VDC | 0.14 VDC |
| 1781115643 | 950 Count | 1013 Count | 899 Count | 4.43 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)