This is the latest recevied telemetry packets stored in our database for station/object SP8G-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1789218798 | 27 Count | 126 Count | 2 Count | 3.06 VDC | 0 VDC |
| 1789218698 | 22 Count | 125 Count | 2 Count | 3.05 VDC | 0 VDC |
| 1789218502 | 12 Count | 122 Count | 2 Count | 3.05 VDC | 0 VDC |
| 1789213666 | 7 Count | 121 Count | 2 Count | 3.06 VDC | 0 VDC |
| 1789212765 | 6 Count | 110 Count | 2 Count | 3.1 VDC | 0 VDC |
| 1789211864 | 5 Count | 99 Count | 2 Count | 3.11 VDC | 0 VDC |
| 1789210963 | 4 Count | 87 Count | 2 Count | 3.16 VDC | 0 VDC |
| 1789210062 | 2 Count | 67 Count | 1 Count | 3.17 VDC | 0 VDC |
| 1789209161 | 1 Count | 45 Count | 1 Count | 3.2 VDC | 0 VDC |
| 1789206459 | 111 Count | 945 Count | 38 Count | 3.16 VDC | 0 VDC |
| 1789205558 | 110 Count | 934 Count | 38 Count | 3.2 VDC | 0 VDC |
| 1789204657 | 108 Count | 919 Count | 37 Count | 3.2 VDC | 0 VDC |
| 1789203756 | 106 Count | 891 Count | 36 Count | 3.2 VDC | 0 VDC |
| 1789199600 | 100 Count | 874 Count | 36 Count | 3.05 VDC | 0 VDC |
| 1789198699 | 99 Count | 816 Count | 36 Count | 3.09 VDC | 0 VDC |
| 1789197798 | 97 Count | 804 Count | 35 Count | 3.13 VDC | 0 VDC |
| 1789196897 | 94 Count | 792 Count | 33 Count | 3.16 VDC | 0 VDC |
| 1789195996 | 92 Count | 781 Count | 32 Count | 3.17 VDC | 0 VDC |
| 1789195095 | 90 Count | 760 Count | 31 Count | 3.2 VDC | 0 VDC |
| 1789194195 | 89 Count | 747 Count | 31 Count | 3.2 VDC | 0 VDC |
| 1789193293 | 87 Count | 730 Count | 30 Count | 3.22 VDC | 0 VDC |
| 1789192393 | 86 Count | 718 Count | 30 Count | 3.25 VDC | 0 VDC |
| 1789191492 | 84 Count | 701 Count | 29 Count | 3.27 VDC | 0 VDC |
| 1789190590 | 83 Count | 693 Count | 29 Count | 3.29 VDC | 0 VDC |
| 1789189689 | 82 Count | 678 Count | 29 Count | 3.3 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)