This is the latest recevied telemetry packets stored in our database for station/object YC1SDZ-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp.* | Humidity* | Pressure* | Satellite* | Value5* |
|---|---|---|---|---|---|
| 1773652532 | 40 °C | 30 %RH | 999 hPa | 12 Sat | 0 |
| 1773650632 | 41 °C | 29 %RH | 999 hPa | 12 Sat | 0 |
| 1773648731 | 40 °C | 28 %RH | 1000 hPa | 12 Sat | 0 |
| 1773646831 | 40 °C | 28 %RH | 1000 hPa | 11 Sat | 0 |
| 1773644931 | 40 °C | 28 %RH | 1000 hPa | 11 Sat | 0 |
| 1773644880 | 40 °C | 28 %RH | 1000 hPa | 11 Sat | 0 |
| 1773644066 | 40 °C | 27 %RH | 1000 hPa | 8 Sat | 0 |
| 1773642167 | 40 °C | 29 %RH | 1001 hPa | 11 Sat | 0 |
| 1773641759 | 39 °C | 29 %RH | 1001 hPa | 11 Sat | 0 |
| 1773640694 | 40 °C | 30 %RH | 1001 hPa | 11 Sat | 0 |
| 1773639061 | 39 °C | 35 %RH | 1002 hPa | 10 Sat | 0 |
| 1773636849 | 39 °C | 32 %RH | 1003 hPa | 12 Sat | 0 |
| 1773634952 | 38 °C | 36 %RH | 1003 hPa | 10 Sat | 0 |
| 1773633049 | 37 °C | 39 %RH | 1003 hPa | 8 Sat | 0 |
| 1773631151 | 37 °C | 40 %RH | 1004 hPa | 9 Sat | 0 |
| 1773629249 | 37 °C | 38 %RH | 1004 hPa | 9 Sat | 0 |
| 1773627349 | 36 °C | 42 %RH | 1004 hPa | 8 Sat | 0 |
| 1773625449 | 35 °C | 43 %RH | 1004 hPa | 8 Sat | 0 |
| 1773623549 | 36 °C | 41 %RH | 1004 hPa | 8 Sat | 0 |
| 1773621650 | 36 °C | 41 %RH | 1003 hPa | 9 Sat | 0 |
| 1773619749 | 35 °C | 40 %RH | 1003 hPa | 10 Sat | 0 |
| 1773617852 | 35 °C | 41 %RH | 1003 hPa | 10 Sat | 0 |
| 1773615950 | 35 °C | 43 %RH | 1003 hPa | 9 Sat | 0 |
| 1773614050 | 35 °C | 42 %RH | 1003 hPa | 11 Sat | 0 |
| 1773612150 | 36 °C | 41 %RH | 1003 hPa | 10 Sat | 0 |
*Used Equation Coefficients:
Temp.: 0, 1, 0
Humidity: 0, 1, 0
Pressure: 0, 1, 0
Satellite: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)