This is the latest recevied telemetry packets stored in our database for station/object YH0AA. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp.* | Humidity* | Pressure* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1777707210 | 43 °C | 0 %RH | 1003 hPa | 0 | 0 |
| 1777705310 | 43 °C | 0 %RH | 1003 hPa | 0 | 0 |
| 1777703410 | 43 °C | 0 %RH | 1003 hPa | 0 | 0 |
| 1777701510 | 42 °C | 0 %RH | 1004 hPa | 0 | 0 |
| 1777699610 | 42 °C | 0 %RH | 1004 hPa | 0 | 0 |
| 1777697710 | 42 °C | 0 %RH | 1005 hPa | 0 | 0 |
| 1777695810 | 41 °C | 0 %RH | 1005 hPa | 0 | 0 |
| 1777693910 | 41 °C | 0 %RH | 1006 hPa | 0 | 0 |
| 1777692463 | 41 °C | 0 %RH | 1006 hPa | 0 | 0 |
| 1777690563 | 41 °C | 0 %RH | 1007 hPa | 0 | 0 |
| 1777688663 | 40 °C | 0 %RH | 1006 hPa | 0 | 0 |
| 1777686763 | 40 °C | 0 %RH | 1006 hPa | 0 | 0 |
| 1777684863 | 40 °C | 0 %RH | 1006 hPa | 0 | 0 |
| 1777682963 | 40 °C | 0 %RH | 1006 hPa | 0 | 0 |
| 1777681063 | 39 °C | 0 %RH | 1005 hPa | 0 | 0 |
| 1777679163 | 38 °C | 0 %RH | 1005 hPa | 0 | 0 |
| 1777677263 | 37 °C | 0 %RH | 1004 hPa | 0 | 0 |
| 1777675363 | 37 °C | 0 %RH | 1004 hPa | 0 | 0 |
| 1777673463 | 37 °C | 0 %RH | 1004 hPa | 0 | 0 |
| 1777671563 | 37 °C | 0 %RH | 1004 hPa | 0 | 0 |
| 1777669663 | 37 °C | 0 %RH | 1004 hPa | 0 | 0 |
| 1777667763 | 38 °C | 0 %RH | 1004 hPa | 0 | 0 |
| 1777665863 | 38 °C | 0 %RH | 1004 hPa | 0 | 0 |
| 1777663963 | 38 °C | 0 %RH | 1004 hPa | 0 | 0 |
| 1777662063 | 37 °C | 0 %RH | 1004 hPa | 0 | 0 |
*Used Equation Coefficients:
Temp.: 0, 1, 0
Humidity: 0, 1, 0
Pressure: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)