EA2RCF LoRa APRS MAP Backup

My position About Go to MAIN map Powered by EA2RCF Radioclub Foronda ☰

reset

SQ3NVZ-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SQ3NVZ-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	TX*	RX*	Digi*
1791237298	18 Count	159 Count	13 Count
1791235497	15 Count	149 Count	11 Count
1791233695	11 Count	134 Count	8 Count
1791231894	7 Count	74 Count	6 Count
1791230092	2 Count	41 Count	2 Count
1791228290	92 Count	1054 Count	41 Count
1791226489	88 Count	995 Count	38 Count
1791224688	81 Count	930 Count	36 Count
1791222886	77 Count	867 Count	33 Count
1791221085	73 Count	785 Count	30 Count
1791219283	68 Count	713 Count	26 Count
1791217482	61 Count	647 Count	24 Count
1791215681	54 Count	572 Count	21 Count
1791213879	50 Count	480 Count	18 Count
1791212078	45 Count	386 Count	14 Count
1791210277	30 Count	272 Count	12 Count
1791208476	25 Count	183 Count	8 Count
1791206675	22 Count	116 Count	6 Count
1791204908	17 Count	53 Count	2 Count
1791203103	194 Count	1003 Count	39 Count
1791201301	147 Count	932 Count	35 Count
1791199500	144 Count	870 Count	33 Count
1791197699	140 Count	809 Count	30 Count
1791195898	138 Count	764 Count	29 Count
1791194097	134 Count	724 Count	26 Count

*Used Equation Coefficients:

TX: 0, 1, 0

RX: 0, 1, 0

Digi: 0, 1, 0

V_Bat: 0, 0.01, 0

V_Ext: 0, 0.02, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)