This is the latest recevied telemetry packets stored in our database for station/object SP8KZI-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1777100851 | 411 Count | 505 Count | 36 Count | 0 VDC | 0.08 VDC |
| 1777099947 | 410 Count | 504 Count | 36 Count | 0 VDC | 0.08 VDC |
| 1777099044 | 409 Count | 503 Count | 36 Count | 0 VDC | 0.08 VDC |
| 1777098141 | 408 Count | 502 Count | 36 Count | 0 VDC | 0.08 VDC |
| 1777097238 | 407 Count | 501 Count | 36 Count | 0 VDC | 0.08 VDC |
| 1777096335 | 406 Count | 500 Count | 36 Count | 0 VDC | 0.08 VDC |
| 1777095432 | 405 Count | 498 Count | 36 Count | 0 VDC | 0.08 VDC |
| 1777094529 | 404 Count | 498 Count | 36 Count | 0 VDC | 0.08 VDC |
| 1777093626 | 403 Count | 496 Count | 36 Count | 0 VDC | 0.08 VDC |
| 1777092724 | 402 Count | 495 Count | 36 Count | 0 VDC | 0.08 VDC |
| 1777091820 | 401 Count | 493 Count | 36 Count | 0 VDC | 0.08 VDC |
| 1777090917 | 400 Count | 493 Count | 36 Count | 0 VDC | 0.08 VDC |
| 1777090014 | 399 Count | 492 Count | 36 Count | 0 VDC | 0.08 VDC |
| 1777089111 | 398 Count | 491 Count | 36 Count | 0 VDC | 0.08 VDC |
| 1777088208 | 397 Count | 491 Count | 36 Count | 0 VDC | 0.08 VDC |
| 1777087305 | 396 Count | 490 Count | 36 Count | 0 VDC | 0.08 VDC |
| 1777086402 | 395 Count | 489 Count | 36 Count | 0 VDC | 0.08 VDC |
| 1777085499 | 394 Count | 488 Count | 36 Count | 0 VDC | 0.08 VDC |
| 1777084597 | 393 Count | 486 Count | 36 Count | 0 VDC | 0.08 VDC |
| 1777083694 | 392 Count | 486 Count | 36 Count | 0 VDC | 0.08 VDC |
| 1777082861 | 387 Count | 482 Count | 36 Count | 0 VDC | 0.08 VDC |
| 1777081958 | 386 Count | 481 Count | 36 Count | 0 VDC | 0.08 VDC |
| 1777081055 | 385 Count | 480 Count | 36 Count | 0 VDC | 0.08 VDC |
| 1777080152 | 384 Count | 478 Count | 36 Count | 0 VDC | 0.08 VDC |
| 1777079249 | 383 Count | 477 Count | 36 Count | 0 VDC | 0.08 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)