This is the latest recevied telemetry packets stored in our database for station/object OK1VIG-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1785084013 | 361 Count | 397 Count | 235 Count | 3.57 VDC | 0.14 VDC |
| 1785080407 | 360 Count | 397 Count | 235 Count | 3.58 VDC | 0.14 VDC |
| 1785076802 | 358 Count | 395 Count | 234 Count | 3.55 VDC | 0.14 VDC |
| 1785073197 | 357 Count | 394 Count | 234 Count | 3.56 VDC | 0.14 VDC |
| 1785062412 | 354 Count | 348 Count | 234 Count | 3.54 VDC | 0.14 VDC |
| 1785058806 | 353 Count | 347 Count | 234 Count | 3.56 VDC | 0.14 VDC |
| 1785055201 | 352 Count | 347 Count | 234 Count | 3.57 VDC | 0.14 VDC |
| 1785051596 | 351 Count | 344 Count | 234 Count | 3.55 VDC | 0.14 VDC |
| 1785047990 | 350 Count | 344 Count | 234 Count | 3.53 VDC | 0.14 VDC |
| 1785044385 | 349 Count | 344 Count | 234 Count | 3.52 VDC | 0.14 VDC |
| 1785040810 | 347 Count | 343 Count | 233 Count | 3.5 VDC | 0.14 VDC |
| 1785037204 | 344 Count | 341 Count | 231 Count | 3.5 VDC | 0.14 VDC |
| 1785033599 | 341 Count | 339 Count | 229 Count | 3.48 VDC | 0.14 VDC |
| 1785029994 | 339 Count | 338 Count | 228 Count | 3.51 VDC | 0.14 VDC |
| 1785026389 | 337 Count | 337 Count | 227 Count | 3.51 VDC | 0.14 VDC |
| 1785022784 | 335 Count | 331 Count | 226 Count | 3.51 VDC | 0.14 VDC |
| 1785019332 | 333 Count | 330 Count | 225 Count | 3.52 VDC | 0.14 VDC |
| 1785015601 | 332 Count | 330 Count | 225 Count | 3.53 VDC | 0.14 VDC |
| 1785011996 | 331 Count | 330 Count | 225 Count | 3.54 VDC | 0.14 VDC |
| 1785008391 | 329 Count | 329 Count | 224 Count | 3.55 VDC | 0.14 VDC |
| 1785004786 | 327 Count | 328 Count | 223 Count | 3.55 VDC | 0.14 VDC |
| 1785001181 | 326 Count | 328 Count | 223 Count | 3.56 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)