This is the latest recevied telemetry packets stored in our database for station/object SQ3BMR. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1769020934 | 230 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1769020033 | 201 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1769019132 | 174 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1769018231 | 142 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1769017330 | 116 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1769016429 | 86 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1769015552 | 60 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1769014651 | 24 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1769013750 | 1028 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1769012849 | 995 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1769011948 | 967 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1769011047 | 933 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1769010146 | 906 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1769009245 | 870 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1769008344 | 838 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1769007444 | 805 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1769006542 | 777 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1769005641 | 743 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1769004740 | 711 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1769003839 | 681 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1769002938 | 649 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1769002037 | 616 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1769001136 | 587 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1769000235 | 552 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1768999334 | 527 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)