This is the latest recevied telemetry packets stored in our database for station/object SP6RTS-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1777139121 | 0 Count | 924 Count | 0 Count | 0 VDC | 0 VDC |
| 1777138218 | 0 Count | 924 Count | 0 Count | 0 VDC | 0 VDC |
| 1777137316 | 0 Count | 924 Count | 0 Count | 0 VDC | 0 VDC |
| 1777136414 | 0 Count | 924 Count | 0 Count | 0 VDC | 0 VDC |
| 1777135512 | 0 Count | 924 Count | 0 Count | 0 VDC | 0 VDC |
| 1777134609 | 0 Count | 924 Count | 0 Count | 0 VDC | 0 VDC |
| 1777133707 | 0 Count | 924 Count | 0 Count | 0 VDC | 0 VDC |
| 1777132805 | 0 Count | 923 Count | 0 Count | 0 VDC | 0 VDC |
| 1777131902 | 0 Count | 922 Count | 0 Count | 0 VDC | 0 VDC |
| 1777131000 | 0 Count | 922 Count | 0 Count | 0 VDC | 0 VDC |
| 1777130098 | 0 Count | 921 Count | 0 Count | 0 VDC | 0 VDC |
| 1777129195 | 0 Count | 921 Count | 0 Count | 0 VDC | 0 VDC |
| 1777128293 | 0 Count | 921 Count | 0 Count | 0 VDC | 0 VDC |
| 1777127445 | 0 Count | 920 Count | 0 Count | 0 VDC | 0 VDC |
| 1777126543 | 0 Count | 919 Count | 0 Count | 0 VDC | 0 VDC |
| 1777125641 | 0 Count | 917 Count | 0 Count | 0 VDC | 0 VDC |
| 1777124739 | 0 Count | 917 Count | 0 Count | 0 VDC | 0 VDC |
| 1777123836 | 0 Count | 916 Count | 0 Count | 0 VDC | 0 VDC |
| 1777122934 | 0 Count | 916 Count | 0 Count | 0 VDC | 0 VDC |
| 1777122032 | 0 Count | 900 Count | 0 Count | 0 VDC | 0 VDC |
| 1777121129 | 0 Count | 899 Count | 0 Count | 0 VDC | 0 VDC |
| 1777120227 | 0 Count | 899 Count | 0 Count | 0 VDC | 0 VDC |
| 1777119325 | 0 Count | 898 Count | 0 Count | 0 VDC | 0 VDC |
| 1777118423 | 0 Count | 895 Count | 0 Count | 0 VDC | 0 VDC |
| 1777117521 | 0 Count | 895 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)