This is the latest recevied telemetry packets stored in our database for station/object F5UGQ-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1772040971 | 9 Count | 29 Count | 0 Count | 4.23 VDC | 0.14 VDC |
| 1772039168 | 8 Count | 28 Count | 0 Count | 4.25 VDC | 0.14 VDC |
| 1772037365 | 7 Count | 24 Count | 0 Count | 4.23 VDC | 0.14 VDC |
| 1772035562 | 6 Count | 21 Count | 0 Count | 4.26 VDC | 0.14 VDC |
| 1772033760 | 5 Count | 18 Count | 0 Count | 4.19 VDC | 0.14 VDC |
| 1772031957 | 4 Count | 15 Count | 0 Count | 4.28 VDC | 0.14 VDC |
| 1772030154 | 3 Count | 11 Count | 0 Count | 4.26 VDC | 0.14 VDC |
| 1772028351 | 2 Count | 7 Count | 0 Count | 4.27 VDC | 0.14 VDC |
| 1772026548 | 1 Count | 4 Count | 0 Count | 4.29 VDC | 0.14 VDC |
| 1772022969 | 271 Count | 1003 Count | 0 Count | 4.19 VDC | 0.14 VDC |
| 1772021166 | 270 Count | 999 Count | 0 Count | 4.27 VDC | 0.14 VDC |
| 1772019363 | 269 Count | 997 Count | 0 Count | 4.22 VDC | 0.14 VDC |
| 1772017560 | 268 Count | 995 Count | 0 Count | 4.2 VDC | 0.14 VDC |
| 1772015758 | 267 Count | 993 Count | 0 Count | 4.29 VDC | 0.14 VDC |
| 1772013955 | 266 Count | 991 Count | 0 Count | 4.28 VDC | 0.14 VDC |
| 1772012152 | 265 Count | 986 Count | 0 Count | 4.22 VDC | 0.14 VDC |
| 1772010349 | 264 Count | 973 Count | 0 Count | 4.2 VDC | 0.14 VDC |
| 1772008546 | 263 Count | 962 Count | 0 Count | 4.28 VDC | 0.14 VDC |
| 1772006744 | 262 Count | 957 Count | 0 Count | 4.24 VDC | 0.14 VDC |
| 1772004941 | 261 Count | 953 Count | 0 Count | 4.27 VDC | 0.14 VDC |
| 1772003138 | 260 Count | 949 Count | 0 Count | 4.21 VDC | 0.14 VDC |
| 1772001369 | 259 Count | 943 Count | 0 Count | 4.26 VDC | 0.14 VDC |
| 1771999566 | 258 Count | 939 Count | 0 Count | 4.23 VDC | 0.14 VDC |
| 1771997763 | 257 Count | 933 Count | 0 Count | 4.19 VDC | 0.14 VDC |
| 1771995960 | 256 Count | 931 Count | 0 Count | 4.22 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)