This is the latest recevied telemetry packets stored in our database for station/object SR8NZ-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1767106059 | 828 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1767105999 | 827 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1767105938 | 826 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1767105877 | 825 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1767105816 | 824 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1767105792 | 823 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1767105792 | 822 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1767105791 | 821 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1767105573 | 820 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1767105513 | 819 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1767105452 | 818 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1767105391 | 817 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1767105331 | 816 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1767105270 | 815 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1767105209 | 814 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1767105148 | 813 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1767105087 | 812 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1767105026 | 811 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1767104965 | 810 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1767104905 | 809 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1767104844 | 808 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1767104783 | 807 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1767104722 | 806 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1767104662 | 805 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1767104601 | 804 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)