This is the latest recevied telemetry packets stored in our database for station/object SP6ZWR-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Celsius* | Rel_Hum* | Atm_Press* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1780147501 | 40.5 C | 15.77 % | 1015.13 hPa | 0 | 0 |
| 1780146600 | 40.4 C | 16.03 % | 1014.75 hPa | 0 | 0 |
| 1780145699 | 40.5 C | 16.04 % | 1015 hPa | 0 | 0 |
| 1780144798 | 40.9 C | 16.12 % | 1010.25 hPa | 0 | 0 |
| 1780143901 | 41.6 C | 15.47 % | 1010.63 hPa | 0 | 0 |
| 1780143670 | 41.8 C | 15.24 % | 1017.5 hPa | 0 | 0 |
| 1780142769 | 42.4 C | 14.92 % | 1018.75 hPa | 0 | 0 |
| 1780142092 | 42.8 C | 14.41 % | 1016.75 hPa | 0 | 0 |
| 1780141187 | 43.9 C | 13.19 % | 1014.63 hPa | 0 | 0 |
| 1780140286 | 45.2 C | 11.74 % | 1016.25 hPa | 0 | 0 |
| 1780139385 | 47 C | 11.97 % | 1017 hPa | 0 | 0 |
| 1780125763 | 28.5 C | 30.22 % | 1018.88 hPa | 0 | 0 |
| 1780125742 | 28.5 C | 30.22 % | 1019.75 hPa | 0 | 0 |
| 1780125707 | 28.5 C | 30.22 % | 1018 hPa | 0 | 0 |
| 1780125563 | 27.6 C | 28.23 % | 1018.38 hPa | 0 | 0 |
| 1780125542 | 27.6 C | 28.23 % | 1018.13 hPa | 0 | 0 |
| 1780125523 | 26.8 C | 27.37 % | 1018.88 hPa | 0 | 0 |
| 1780125510 | 26.8 C | 27.37 % | 1019.25 hPa | 0 | 0 |
| 1780125384 | 24.6 C | 25.24 % | 1021.88 hPa | 0 | 0 |
| 1780125369 | 24.6 C | 25.24 % | 1022.38 hPa | 0 | 0 |
| 1780125356 | 24.6 C | 25.24 % | 1019.13 hPa | 0 | 0 |
| 1780125331 | 23 C | 24.91 % | 1003.13 hPa | 0 | 0 |
| 1780083629 | 35.2 C | 13.7 % | 1024.38 hPa | 0 | 0 |
| 1780083611 | 35.2 C | 13.7 % | 1024.38 hPa | 0 | 0 |
| 1780083582 | 35.2 C | 13.47 % | 1024 hPa | 0 | 0 |
*Used Equation Coefficients:
Celsius: 0, 0.1, -50
Rel_Hum: 0, 0.01, 0
Atm_Press: 0, 0.125, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)