This is the latest recevied telemetry packets stored in our database for station/object F5UGQ-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1773668558 | 54 Count | 114 Count | 0 Count | 4.23 VDC | 0.14 VDC |
| 1773666755 | 53 Count | 112 Count | 0 Count | 4.27 VDC | 0.14 VDC |
| 1773664952 | 52 Count | 110 Count | 0 Count | 4.3 VDC | 0.14 VDC |
| 1773663150 | 51 Count | 108 Count | 0 Count | 4.29 VDC | 0.14 VDC |
| 1773661347 | 50 Count | 104 Count | 0 Count | 4.2 VDC | 0.14 VDC |
| 1773659544 | 49 Count | 102 Count | 0 Count | 4.27 VDC | 0.14 VDC |
| 1773657741 | 48 Count | 101 Count | 0 Count | 4.23 VDC | 0.14 VDC |
| 1773655939 | 47 Count | 99 Count | 0 Count | 4.29 VDC | 0.14 VDC |
| 1773654136 | 46 Count | 96 Count | 0 Count | 4.24 VDC | 0.14 VDC |
| 1773652333 | 45 Count | 95 Count | 0 Count | 4.24 VDC | 0.14 VDC |
| 1773650530 | 44 Count | 94 Count | 0 Count | 4.29 VDC | 0.14 VDC |
| 1773648761 | 43 Count | 91 Count | 0 Count | 4.22 VDC | 0.14 VDC |
| 1773646958 | 42 Count | 89 Count | 0 Count | 4.28 VDC | 0.14 VDC |
| 1773645155 | 41 Count | 88 Count | 0 Count | 4.22 VDC | 0.14 VDC |
| 1773643352 | 40 Count | 87 Count | 0 Count | 4.3 VDC | 0.14 VDC |
| 1773641550 | 39 Count | 86 Count | 0 Count | 4.3 VDC | 0.14 VDC |
| 1773639747 | 38 Count | 82 Count | 0 Count | 4.26 VDC | 0.14 VDC |
| 1773637944 | 37 Count | 81 Count | 0 Count | 4.19 VDC | 0.14 VDC |
| 1773636141 | 36 Count | 78 Count | 0 Count | 4.26 VDC | 0.14 VDC |
| 1773634339 | 35 Count | 77 Count | 0 Count | 4.26 VDC | 0.14 VDC |
| 1773632536 | 34 Count | 76 Count | 0 Count | 4.27 VDC | 0.14 VDC |
| 1773630733 | 33 Count | 72 Count | 0 Count | 4.23 VDC | 0.14 VDC |
| 1773628930 | 32 Count | 71 Count | 0 Count | 4.3 VDC | 0.14 VDC |
| 1773627160 | 31 Count | 68 Count | 0 Count | 4.3 VDC | 0.14 VDC |
| 1773625357 | 30 Count | 67 Count | 0 Count | 4.3 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)