This is the latest recevied telemetry packets stored in our database for station/object F5UGQ-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1773171376 | 131 Count | 527 Count | 0 Count | 4.23 VDC | 0.14 VDC |
| 1773169573 | 130 Count | 523 Count | 0 Count | 4.19 VDC | 0.14 VDC |
| 1773167803 | 129 Count | 521 Count | 0 Count | 4.25 VDC | 0.14 VDC |
| 1773166000 | 128 Count | 519 Count | 0 Count | 4.19 VDC | 0.14 VDC |
| 1773164197 | 127 Count | 517 Count | 0 Count | 4.27 VDC | 0.14 VDC |
| 1773162395 | 126 Count | 512 Count | 0 Count | 4.23 VDC | 0.14 VDC |
| 1773160592 | 125 Count | 510 Count | 0 Count | 4.21 VDC | 0.14 VDC |
| 1773158789 | 124 Count | 504 Count | 0 Count | 4.27 VDC | 0.14 VDC |
| 1773156986 | 123 Count | 501 Count | 0 Count | 4.22 VDC | 0.14 VDC |
| 1773155184 | 122 Count | 498 Count | 0 Count | 4.21 VDC | 0.14 VDC |
| 1773153381 | 121 Count | 494 Count | 0 Count | 4.3 VDC | 0.14 VDC |
| 1773151578 | 120 Count | 491 Count | 0 Count | 4.25 VDC | 0.14 VDC |
| 1773149775 | 119 Count | 488 Count | 0 Count | 4.27 VDC | 0.14 VDC |
| 1773147972 | 118 Count | 486 Count | 0 Count | 4.2 VDC | 0.14 VDC |
| 1773146202 | 117 Count | 480 Count | 0 Count | 4.19 VDC | 0.14 VDC |
| 1773144399 | 116 Count | 476 Count | 0 Count | 4.25 VDC | 0.14 VDC |
| 1773142597 | 115 Count | 472 Count | 0 Count | 4.28 VDC | 0.14 VDC |
| 1773140794 | 114 Count | 466 Count | 0 Count | 4.3 VDC | 0.14 VDC |
| 1773138991 | 113 Count | 461 Count | 0 Count | 4.29 VDC | 0.14 VDC |
| 1773137188 | 112 Count | 456 Count | 0 Count | 4.19 VDC | 0.14 VDC |
| 1773135385 | 111 Count | 451 Count | 0 Count | 4.26 VDC | 0.14 VDC |
| 1773133583 | 110 Count | 447 Count | 0 Count | 4.26 VDC | 0.14 VDC |
| 1773131780 | 109 Count | 445 Count | 0 Count | 4.23 VDC | 0.14 VDC |
| 1773129977 | 108 Count | 441 Count | 0 Count | 4.24 VDC | 0.14 VDC |
| 1773128174 | 107 Count | 437 Count | 0 Count | 4.23 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)