This is the latest recevied telemetry packets stored in our database for station/object EA5SW-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1751660798 | 0 Count | 567 Count | 0 Count | 0 VDC | 0 VDC |
| 1751658998 | 0 Count | 506 Count | 0 Count | 0 VDC | 0 VDC |
| 1751657198 | 0 Count | 440 Count | 0 Count | 0 VDC | 0 VDC |
| 1751655398 | 0 Count | 376 Count | 0 Count | 0 VDC | 0 VDC |
| 1751653598 | 0 Count | 320 Count | 0 Count | 0 VDC | 0 VDC |
| 1751651798 | 0 Count | 263 Count | 0 Count | 0 VDC | 0 VDC |
| 1751649998 | 0 Count | 196 Count | 0 Count | 0 VDC | 0 VDC |
| 1751648198 | 0 Count | 115 Count | 0 Count | 0 VDC | 0 VDC |
| 1751646397 | 0 Count | 58 Count | 0 Count | 0 VDC | 0 VDC |
| 1751644597 | 0 Count | 1030 Count | 0 Count | 0 VDC | 0 VDC |
| 1751642797 | 0 Count | 952 Count | 0 Count | 0 VDC | 0 VDC |
| 1751640997 | 0 Count | 885 Count | 0 Count | 0 VDC | 0 VDC |
| 1751639197 | 0 Count | 841 Count | 0 Count | 0 VDC | 0 VDC |
| 1751637397 | 0 Count | 768 Count | 0 Count | 0 VDC | 0 VDC |
| 1751635597 | 0 Count | 724 Count | 0 Count | 0 VDC | 0 VDC |
| 1751633797 | 0 Count | 645 Count | 0 Count | 0 VDC | 0 VDC |
| 1751631997 | 0 Count | 586 Count | 0 Count | 0 VDC | 0 VDC |
| 1751630197 | 0 Count | 523 Count | 0 Count | 0 VDC | 0 VDC |
| 1751628398 | 0 Count | 474 Count | 0 Count | 0 VDC | 0 VDC |
| 1751626656 | 0 Count | 421 Count | 0 Count | 0 VDC | 0 VDC |
| 1751624856 | 0 Count | 375 Count | 0 Count | 0 VDC | 0 VDC |
| 1751623056 | 0 Count | 277 Count | 0 Count | 0 VDC | 0 VDC |
| 1751621256 | 0 Count | 203 Count | 0 Count | 0 VDC | 0 VDC |
| 1751619456 | 0 Count | 159 Count | 0 Count | 0 VDC | 0 VDC |
| 1751617656 | 0 Count | 119 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)