This is the latest recevied telemetry packets stored in our database for station/object IW2FCH-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Voltage* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1789233756 | 3.6 VDC | 0 | 0 | 0 | 0 |
| 1789233693 | 3.57 VDC | 0 | 0 | 0 | 0 |
| 1789233504 | 3.57 VDC | 0 | 0 | 0 | 0 |
| 1789233489 | 3.57 VDC | 0 | 0 | 0 | 0 |
| 1789233474 | 3.56 VDC | 0 | 0 | 0 | 0 |
| 1789233458 | 3.56 VDC | 0 | 0 | 0 | 0 |
| 1789233442 | 3.56 VDC | 0 | 0 | 0 | 0 |
| 1789233426 | 3.56 VDC | 0 | 0 | 0 | 0 |
| 1789233322 | 3.49 VDC | 0 | 0 | 0 | 0 |
| 1789226379 | 3.61 VDC | 0 | 0 | 0 | 0 |
| 1789226363 | 3.63 VDC | 0 | 0 | 0 | 0 |
| 1789226315 | 3.63 VDC | 0 | 0 | 0 | 0 |
| 1789226283 | 3.59 VDC | 0 | 0 | 0 | 0 |
| 1789226268 | 3.59 VDC | 0 | 0 | 0 | 0 |
| 1789226254 | 3.59 VDC | 0 | 0 | 0 | 0 |
| 1789226235 | 3.56 VDC | 0 | 0 | 0 | 0 |
| 1789226187 | 3.56 VDC | 0 | 0 | 0 | 0 |
| 1789214235 | 3.55 VDC | 0 | 0 | 0 | 0 |
| 1789213967 | 3.56 VDC | 0 | 0 | 0 | 0 |
| 1789213952 | 3.56 VDC | 0 | 0 | 0 | 0 |
| 1789213841 | 3.58 VDC | 0 | 0 | 0 | 0 |
| 1789213774 | 3.55 VDC | 0 | 0 | 0 | 0 |
| 1789213499 | 3.59 VDC | 0 | 0 | 0 | 0 |
| 1789213484 | 3.52 VDC | 0 | 0 | 0 | 0 |
| 1789213418 | 3.73 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
Voltage: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)