EA2RCF LoRa APRS MAP

My position About Go to BACKUP map Powered by EA2RCF Radioclub Foronda ☰

reset

HS4IOO Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HS4IOO. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	TEMP*	HUM*	BAR*	BAT*
1769932372	35.68 °C	29.9 %RH	1005.8 hPa	4.19 V
1769931773	34.9 °C	30.9 %RH	1005.9 hPa	4.19 V
1769931173	34.72 °C	30.7 %RH	1006 hPa	4.19 V
1769930572	34.81 °C	30.7 %RH	1006.3 hPa	4.18 V
1769929973	34.86 °C	30.1 %RH	1006.4 hPa	4.19 V
1769929372	34.63 °C	30.5 %RH	1006.6 hPa	4.19 V
1769928772	33.72 °C	31.1 %RH	1006.7 hPa	4.18 V
1769928172	33.9 °C	30.8 %RH	1007 hPa	4.18 V
1769927573	34.22 °C	32.1 %RH	1007.2 hPa	4.11 V
1769926972	33.54 °C	33.2 %RH	1007.4 hPa	4.12 V
1769926373	33.97 °C	32.8 %RH	1007.7 hPa	4.14 V
1769925772	33.97 °C	32.5 %RH	1007.7 hPa	4.19 V
1769925172	34.06 °C	32.7 %RH	1007.9 hPa	4.19 V
1769924572	33.97 °C	34.2 %RH	1008 hPa	4.19 V
1769923972	34.4 °C	34.1 %RH	1008.1 hPa	4.19 V
1769923393	33.59 °C	34.1 %RH	1008.3 hPa	4.19 V
1769922772	33.68 °C	32.6 %RH	1008.5 hPa	4.18 V
1769922172	33.29 °C	36.3 %RH	1008.7 hPa	4.19 V
1769921572	33 °C	36.8 %RH	1008.8 hPa	4.18 V
1769920972	32.06 °C	39.5 %RH	1009 hPa	4.11 V
1769920372	32.31 °C	38.2 %RH	1009.2 hPa	4.12 V
1769919772	32.2 °C	38.9 %RH	1009.4 hPa	4.19 V
1769919172	32.58 °C	37.9 %RH	1009.6 hPa	4.19 V
1769918572	32.9 °C	37.9 %RH	1009.6 hPa	4.19 V
1769917972	32.86 °C	38.8 %RH	1009.7 hPa	4.19 V

*Used Equation Coefficients:

TEMP: 0, 0.01, 0

HUM: 0, 0.1, 0

BAR: 0, 0.1, 800

BAT: 0, 0.01, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)