This is the latest recevied telemetry packets stored in our database for station/object E71JC-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Voltage* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1789633669 | 3.34 VDC | 0 | 0 | 0 | 0 |
| 1789632769 | 3.34 VDC | 0 | 0 | 0 | 0 |
| 1789631868 | 3.34 VDC | 0 | 0 | 0 | 0 |
| 1789630968 | 3.34 VDC | 0 | 0 | 0 | 0 |
| 1789630068 | 3.34 VDC | 0 | 0 | 0 | 0 |
| 1789629167 | 3.34 VDC | 0 | 0 | 0 | 0 |
| 1789628267 | 3.34 VDC | 0 | 0 | 0 | 0 |
| 1789627366 | 3.34 VDC | 0 | 0 | 0 | 0 |
| 1789626466 | 3.35 VDC | 0 | 0 | 0 | 0 |
| 1789625565 | 3.35 VDC | 0 | 0 | 0 | 0 |
| 1789624665 | 3.35 VDC | 0 | 0 | 0 | 0 |
| 1789623765 | 3.35 VDC | 0 | 0 | 0 | 0 |
| 1789622864 | 3.35 VDC | 0 | 0 | 0 | 0 |
| 1789621964 | 3.35 VDC | 0 | 0 | 0 | 0 |
| 1789621063 | 3.35 VDC | 0 | 0 | 0 | 0 |
| 1789620163 | 3.35 VDC | 0 | 0 | 0 | 0 |
| 1789619263 | 3.35 VDC | 0 | 0 | 0 | 0 |
| 1789618363 | 3.35 VDC | 0 | 0 | 0 | 0 |
| 1789617462 | 3.36 VDC | 0 | 0 | 0 | 0 |
| 1789616562 | 3.36 VDC | 0 | 0 | 0 | 0 |
| 1789615661 | 3.36 VDC | 0 | 0 | 0 | 0 |
| 1789614760 | 3.36 VDC | 0 | 0 | 0 | 0 |
| 1789613859 | 3.36 VDC | 0 | 0 | 0 | 0 |
| 1789612959 | 3.36 VDC | 0 | 0 | 0 | 0 |
| 1789612058 | 3.36 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
Voltage: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)