This is the latest recevied telemetry packets stored in our database for station/object E25XKG-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temperatu* | Humidity* | Pressure* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1783388899 | 31 | 63 | 1001 | 0 | 0 |
| 1783388299 | 31 | 62 | 1001 | 0 | 0 |
| 1783387699 | 31 | 62 | 1001 | 0 | 0 |
| 1783387099 | 31 | 63 | 1001 | 0 | 0 |
| 1783386499 | 31 | 63 | 1001 | 0 | 0 |
| 1783385899 | 31 | 63 | 1001 | 0 | 0 |
| 1783385299 | 31 | 62 | 1001 | 0 | 0 |
| 1783384699 | 31 | 63 | 1001 | 0 | 0 |
| 1783384099 | 30 | 62 | 1001 | 0 | 0 |
| 1783383499 | 30 | 61 | 1001 | 0 | 0 |
| 1783382899 | 30 | 62 | 1001 | 0 | 0 |
| 1783382299 | 30 | 62 | 1000 | 0 | 0 |
| 1783381699 | 30 | 62 | 1000 | 0 | 0 |
| 1783381099 | 30 | 62 | 1000 | 0 | 0 |
| 1783380499 | 30 | 61 | 1000 | 0 | 0 |
| 1783379899 | 31 | 61 | 1000 | 0 | 0 |
| 1783379299 | 31 | 62 | 1000 | 0 | 0 |
| 1783378700 | 31 | 61 | 1000 | 0 | 0 |
| 1783378099 | 31 | 61 | 1000 | 0 | 0 |
| 1783377500 | 31 | 61 | 1000 | 0 | 0 |
| 1783376899 | 31 | 60 | 1000 | 0 | 0 |
| 1783376299 | 31 | 60 | 1000 | 0 | 0 |
| 1783375699 | 31 | 60 | 1000 | 0 | 0 |
| 1783375099 | 31 | 60 | 1000 | 0 | 0 |
| 1783374500 | 31 | 60 | 1000 | 0 | 0 |
*Used Equation Coefficients:
Temperatu: 0, 1, 0
Humidity: 0, 1, 0
Pressure: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)