This is the latest recevied telemetry packets stored in our database for station/object SM6FMO-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Voltage* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1764452415 | 3.87 | 0 | 0 | 0 | 0 |
| 1764451512 | 3.88 | 0 | 0 | 0 | 0 |
| 1764450609 | 3.89 | 0 | 0 | 0 | 0 |
| 1764449706 | 3.9 | 0 | 0 | 0 | 0 |
| 1764448803 | 3.91 | 0 | 0 | 0 | 0 |
| 1764447900 | 3.92 | 0 | 0 | 0 | 0 |
| 1764446997 | 3.93 | 0 | 0 | 0 | 0 |
| 1764446094 | 3.94 | 0 | 0 | 0 | 0 |
| 1764445191 | 3.95 | 0 | 0 | 0 | 0 |
| 1764444288 | 3.96 | 0 | 0 | 0 | 0 |
| 1764443385 | 3.97 | 0 | 0 | 0 | 0 |
| 1764442482 | 3.98 | 0 | 0 | 0 | 0 |
| 1764441579 | 3.99 | 0 | 0 | 0 | 0 |
| 1764440676 | 4 | 0 | 0 | 0 | 0 |
| 1764439773 | 4.01 | 0 | 0 | 0 | 0 |
| 1764438870 | 4.02 | 0 | 0 | 0 | 0 |
| 1764437967 | 4.03 | 0 | 0 | 0 | 0 |
| 1764437064 | 4.04 | 0 | 0 | 0 | 0 |
| 1764436161 | 4.05 | 0 | 0 | 0 | 0 |
| 1764435258 | 4.06 | 0 | 0 | 0 | 0 |
| 1764434355 | 4.07 | 0 | 0 | 0 | 0 |
| 1764433452 | 4.08 | 0 | 0 | 0 | 0 |
| 1764432549 | 4.09 | 0 | 0 | 0 | 0 |
| 1764431646 | 4.1 | 0 | 0 | 0 | 0 |
| 1764430743 | 4.11 | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
Voltage: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)