This is the latest recevied telemetry packets stored in our database for station/object HS4IOO. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TEMP* | HUM* | BAR* | BAT* | CPU* |
|---|---|---|---|---|---|
| 1789237232 | 30.09 °C | 100 %RH | 1003.8 hPa | 4.18 V | 35 °C |
| 1789236633 | 29.9 °C | 100 %RH | 1003.8 hPa | 4.11 V | 35 °C |
| 1789236034 | 30.2 °C | 100 %RH | 1004 hPa | 4.11 V | 35 °C |
| 1789235435 | 30.2 °C | 100 %RH | 1004 hPa | 4.11 V | 35 °C |
| 1789234836 | 30.67 °C | 100 %RH | 1004.1 hPa | 4.18 V | 38 °C |
| 1789234239 | 30.47 °C | 100 %RH | 1004.2 hPa | 4.13 V | 38 °C |
| 1789233638 | 30.6 °C | 100 %RH | 1004.4 hPa | 4.1 V | 37 °C |
| 1789233040 | 30.77 °C | 100 %RH | 1004.4 hPa | 4.13 V | 38 °C |
| 1789232441 | 30.35 °C | 100 %RH | 1004.5 hPa | 4.09 V | 40 °C |
| 1789231843 | 30.14 °C | 100 %RH | 1004.5 hPa | 4.18 V | 35 °C |
| 1789231242 | 29.82 °C | 100 %RH | 1004.6 hPa | 4.16 V | 35 °C |
| 1789230643 | 29.46 °C | 100 %RH | 1004.7 hPa | 4.18 V | 35 °C |
| 1789230044 | 29.29 °C | 100 %RH | 1004.8 hPa | 4.18 V | 35 °C |
| 1789229445 | 29.05 °C | 100 %RH | 1004.8 hPa | 4.11 V | 34 °C |
| 1789228846 | 29.02 °C | 100 %RH | 1004.8 hPa | 4.12 V | 34 °C |
| 1789228247 | 29.09 °C | 100 %RH | 1004.9 hPa | 4.12 V | 34 °C |
| 1789227648 | 29.29 °C | 100 %RH | 1005.1 hPa | 4.18 V | 34 °C |
| 1789227049 | 29.36 °C | 100 %RH | 1005.2 hPa | 4.12 V | 34 °C |
| 1789226450 | 29.7 °C | 100 %RH | 1005.1 hPa | 4.12 V | 34 °C |
| 1789225851 | 29.29 °C | 100 %RH | 1005 hPa | 4.18 V | 35 °C |
| 1789225252 | 29.21 °C | 100 %RH | 1005 hPa | 4.13 V | 34 °C |
| 1789224653 | 28.78 °C | 100 %RH | 1004.9 hPa | 4.08 V | 33 °C |
| 1789224054 | 28.72 °C | 100 %RH | 1004.6 hPa | 4.1 V | 34 °C |
| 1789223455 | 28.65 °C | 100 %RH | 1004.3 hPa | 4.11 V | 33 °C |
| 1789222856 | 29.5 °C | 100 %RH | 1004.5 hPa | 4.18 V | 34 °C |
*Used Equation Coefficients:
TEMP: 0, 0.01, 0
HUM: 0, 0.1, 0
BAR: 0, 0.1, 800
BAT: 0, 0.01, 0
CPU: 0, 0.01, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)