This is the latest recevied telemetry packets stored in our database for station/object OK4AB-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TEMP* | HUM* | BARO* | BAT* | SAT* |
|---|---|---|---|---|---|
| 1789227575 | 33.7 C | 35.77 % | 982.3 hPa | 3.73 V | 12 |
| 1789227566 | 33.7 C | 35.77 % | 982.3 hPa | 3.73 V | 12 |
| 1789227563 | 33.7 C | 35.77 % | 982.3 hPa | 3.73 V | 12 |
| 1789227539 | 33.72 C | 35.71 % | 982.3 hPa | 3.73 V | 12 |
| 1789227529 | 33.72 C | 35.71 % | 982.3 hPa | 3.73 V | 12 |
| 1789227524 | 33.72 C | 35.7 % | 982.3 hPa | 3.73 V | 12 |
| 1789227503 | 33.74 C | 35.64 % | 982.3 hPa | 3.72 V | 12 |
| 1789227486 | 33.74 C | 35.29 % | 982.3 hPa | 3.72 V | 12 |
| 1789227469 | 33.74 C | 35.29 % | 982.3 hPa | 3.72 V | 12 |
| 1789227466 | 33.75 C | 35.58 % | 982.3 hPa | 3.72 V | 12 |
| 1789227457 | 33.75 C | 35.58 % | 982.3 hPa | 3.72 V | 12 |
| 1789227447 | 33.75 C | 35.55 % | 982.3 hPa | 3.72 V | 12 |
| 1789227443 | 33.75 C | 35.55 % | 982.3 hPa | 3.72 V | 12 |
| 1789227428 | 33.75 C | 35.5 % | 982.3 hPa | 3.73 V | 12 |
| 1789227416 | 33.77 C | 35.45 % | 982.3 hPa | 3.73 V | 12 |
| 1789227408 | 33.77 C | 35.43 % | 982.3 hPa | 3.73 V | 12 |
| 1789227383 | 33.77 C | 35.44 % | 982.3 hPa | 3.73 V | 12 |
| 1789227376 | 33.77 C | 35.44 % | 982.3 hPa | 3.73 V | 12 |
| 1789227354 | 33.77 C | 35.36 % | 982.3 hPa | 3.72 V | 12 |
| 1789227347 | 33.77 C | 35.39 % | 982.3 hPa | 3.72 V | 12 |
| 1789227340 | 33.77 C | 35.37 % | 982.3 hPa | 3.74 V | 12 |
| 1789227330 | 33.77 C | 35.32 % | 982.3 hPa | 3.74 V | 12 |
| 1789227322 | 33.77 C | 35.32 % | 982.3 hPa | 3.74 V | 12 |
| 1789227287 | 33.75 C | 35.33 % | 982.3 hPa | 3.74 V | 12 |
| 1789227262 | 33.75 C | 35.5 % | 982.3 hPa | 3.74 V | 12 |
*Used Equation Coefficients:
TEMP: 0, 0.01, 0
HUM: 0, 0.01, 0
BARO: 0, 0.1, 800
BAT: 0, 0.01, 0
SAT: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)