EA2RCF LoRa APRS MAP Backup

My position About Go to MAIN map Powered by EA2RCF Radioclub Foronda ☰

reset

OK4AB-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object OK4AB-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	TEMP*	HUM*	BARO*	SAT*
1781690005	33.59 C	39.31 %	978.6 hPa	12
1781689945	33.58 C	39.35 %	978.6 hPa	12
1781689884	33.56 C	39.43 %	978.6 hPa	12
1781689825	33.56 C	39.3 %	978.6 hPa	12
1781689765	33.54 C	39.33 %	978.6 hPa	12
1781689704	33.54 C	39.37 %	978.6 hPa	12
1781689645	33.52 C	39.44 %	978.6 hPa	12
1781689585	33.52 C	39.45 %	978.6 hPa	11
1781689525	33.52 C	39.46 %	978.6 hPa	10
1781689465	33.5 C	39.49 %	978.6 hPa	11
1781689405	33.5 C	39.51 %	978.6 hPa	12
1781689345	33.49 C	39.53 %	978.6 hPa	12
1781689286	33.49 C	39.57 %	978.6 hPa	12
1781689225	33.47 C	39.6 %	978.6 hPa	5
1781689165	33.47 C	39.61 %	978.6 hPa	3
1781689105	33.47 C	39.64 %	978.5 hPa	7
1781689044	33.45 C	39.94 %	978.5 hPa	8
1781688984	33.45 C	39.68 %	978.5 hPa	7
1781688924	33.45 C	39.7 %	978.5 hPa	10
1781688864	33.43 C	39.72 %	978.5 hPa	11
1781688804	33.43 C	39.75 %	978.5 hPa	10
1781688744	33.43 C	39.8 %	978.5 hPa	11
1781688684	33.43 C	39.8 %	978.5 hPa	10
1781688624	33.41 C	39.83 %	978.5 hPa	12
1781688564	33.41 C	39.84 %	978.5 hPa	8

*Used Equation Coefficients:

TEMP: 0, 0.01, 0

HUM: 0, 0.01, 0

BARO: 0, 0.1, 800

BAT: 0, 0.01, 0

SAT: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)