This is the latest recevied telemetry packets stored in our database for station/object 9W2YZI-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1774193743 | 4.24 VDC | 0.8 VDC | 0 | 0 | 0 |
| 1774192842 | 4.25 VDC | 0.72 VDC | 0 | 0 | 0 |
| 1774191942 | 4.26 VDC | 0.82 VDC | 0 | 0 | 0 |
| 1774191042 | 4.24 VDC | 0.82 VDC | 0 | 0 | 0 |
| 1774190142 | 4.25 VDC | 0.8 VDC | 0 | 0 | 0 |
| 1774189241 | 4.25 VDC | 0.8 VDC | 0 | 0 | 0 |
| 1774188341 | 4.25 VDC | 0.8 VDC | 0 | 0 | 0 |
| 1774187441 | 4.24 VDC | 0.84 VDC | 0 | 0 | 0 |
| 1774186541 | 4.24 VDC | 0.68 VDC | 0 | 0 | 0 |
| 1774185640 | 4.26 VDC | 0.84 VDC | 0 | 0 | 0 |
| 1774184740 | 4.24 VDC | 0.82 VDC | 0 | 0 | 0 |
| 1774183840 | 4.25 VDC | 0.82 VDC | 0 | 0 | 0 |
| 1774182940 | 4.26 VDC | 0.72 VDC | 0 | 0 | 0 |
| 1774182040 | 4.24 VDC | 0.82 VDC | 0 | 0 | 0 |
| 1774181139 | 4.25 VDC | 0.82 VDC | 0 | 0 | 0 |
| 1774180239 | 4.26 VDC | 0.76 VDC | 0 | 0 | 0 |
| 1774179339 | 4.25 VDC | 0.78 VDC | 0 | 0 | 0 |
| 1774178439 | 4.25 VDC | 0.78 VDC | 0 | 0 | 0 |
| 1774177538 | 4.24 VDC | 0.76 VDC | 0 | 0 | 0 |
| 1774176638 | 4.25 VDC | 0.82 VDC | 0 | 0 | 0 |
| 1774175738 | 4.24 VDC | 0.78 VDC | 0 | 0 | 0 |
| 1774174838 | 4.25 VDC | 0.8 VDC | 0 | 0 | 0 |
| 1774173937 | 4.24 VDC | 0.78 VDC | 0 | 0 | 0 |
| 1774173037 | 4.24 VDC | 0.72 VDC | 0 | 0 | 0 |
| 1774172137 | 4.26 VDC | 0.76 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)