This is the latest recevied telemetry packets stored in our database for station/object F4MLV-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | RX* | Relay* | Drop* | Value5* |
|---|---|---|---|---|---|
| 1789233759 | 4.21 VDC | 146 pkt | 65 pkt | 81 pkt | 0 |
| 1789230166 | 4.19 VDC | 147 pkt | 71 pkt | 76 pkt | 0 |
| 1789226574 | 4.2 VDC | 171 pkt | 69 pkt | 102 pkt | 0 |
| 1789222986 | 4.19 VDC | 157 pkt | 57 pkt | 100 pkt | 0 |
| 1789219382 | 4.2 VDC | 208 pkt | 78 pkt | 130 pkt | 0 |
| 1789215771 | 4.21 VDC | 218 pkt | 73 pkt | 145 pkt | 0 |
| 1789212176 | 4.19 VDC | 216 pkt | 85 pkt | 131 pkt | 0 |
| 1789208589 | 4.2 VDC | 172 pkt | 71 pkt | 101 pkt | 0 |
| 1789204989 | 4.19 VDC | 179 pkt | 69 pkt | 110 pkt | 0 |
| 1789201396 | 4.19 VDC | 165 pkt | 63 pkt | 102 pkt | 0 |
| 1789197804 | 4.2 VDC | 187 pkt | 63 pkt | 124 pkt | 0 |
| 1789194216 | 4.18 VDC | 187 pkt | 77 pkt | 110 pkt | 0 |
| 1789190617 | 4.21 VDC | 169 pkt | 67 pkt | 102 pkt | 0 |
| 1789187018 | 4.2 VDC | 173 pkt | 70 pkt | 103 pkt | 0 |
| 1789183425 | 4.19 VDC | 180 pkt | 70 pkt | 110 pkt | 0 |
| 1789179832 | 4.2 VDC | 191 pkt | 74 pkt | 117 pkt | 0 |
| 1789176238 | 4.2 VDC | 182 pkt | 70 pkt | 112 pkt | 0 |
| 1789172645 | 4.18 VDC | 178 pkt | 58 pkt | 120 pkt | 0 |
| 1789169052 | 4.2 VDC | 164 pkt | 63 pkt | 101 pkt | 0 |
| 1789165458 | 4.18 VDC | 187 pkt | 61 pkt | 126 pkt | 0 |
| 1789161865 | 4.2 VDC | 150 pkt | 63 pkt | 87 pkt | 0 |
| 1789158273 | 4.19 VDC | 166 pkt | 59 pkt | 107 pkt | 0 |
| 1789154678 | 4.2 VDC | 159 pkt | 58 pkt | 101 pkt | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
RX: 0, 1, 0
Relay: 0, 1, 0
Drop: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)