This is the latest recevied telemetry packets stored in our database for station/object SP6DJA-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temperatu* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1773723065 | 0 °C | 0 | 0 | 0 | 0 |
| 1773721265 | 0 °C | 0 | 0 | 0 | 0 |
| 1773719465 | 0 °C | 0 | 0 | 0 | 0 |
| 1773718849 | 0 °C | 0 | 0 | 0 | 0 |
| 1773717050 | 0 °C | 0 | 0 | 0 | 0 |
| 1773715249 | 0 °C | 0 | 0 | 0 | 0 |
| 1773713449 | 0 °C | 0 | 0 | 0 | 0 |
| 1773711035 | 0 °C | 0 | 0 | 0 | 0 |
| 1773709235 | 0 °C | 0 | 0 | 0 | 0 |
| 1773707435 | 0 °C | 0 | 0 | 0 | 0 |
| 1773706819 | 0 °C | 0 | 0 | 0 | 0 |
| 1773705019 | 0 °C | 0 | 0 | 0 | 0 |
| 1773703219 | 0 °C | 0 | 0 | 0 | 0 |
| 1773701418 | 0 °C | 0 | 0 | 0 | 0 |
| 1773700804 | 0 °C | 0 | 0 | 0 | 0 |
| 1773699004 | 0 °C | 0 | 0 | 0 | 0 |
| 1773697204 | 0 °C | 0 | 0 | 0 | 0 |
| 1773695403 | 0 °C | 0 | 0 | 0 | 0 |
| 1773692988 | 0 °C | 0 | 0 | 0 | 0 |
| 1773691188 | 0 °C | 0 | 0 | 0 | 0 |
| 1773689387 | 0 °C | 0 | 0 | 0 | 0 |
| 1773685172 | 0 °C | 0 | 0 | 0 | 0 |
| 1773683372 | 0 °C | 0 | 0 | 0 | 0 |
| 1773682756 | 0 °C | 0 | 0 | 0 | 0 |
| 1773680956 | 0 °C | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
Temperatu: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)