This is the latest recevied telemetry packets stored in our database for station/object SP1ZS-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1793178421 | 136 Count | 224 Count | 101 Count | 4.13 VDC | 0 VDC |
| 1793177820 | 130 Count | 212 Count | 97 Count | 4.12 VDC | 0 VDC |
| 1793177219 | 119 Count | 192 Count | 89 Count | 4.12 VDC | 0 VDC |
| 1793176618 | 111 Count | 179 Count | 83 Count | 4.11 VDC | 0 VDC |
| 1793176018 | 98 Count | 159 Count | 73 Count | 4.12 VDC | 0 VDC |
| 1793175417 | 90 Count | 146 Count | 67 Count | 4.12 VDC | 0 VDC |
| 1793174817 | 80 Count | 128 Count | 59 Count | 4.13 VDC | 0 VDC |
| 1793174216 | 73 Count | 117 Count | 55 Count | 4.12 VDC | 0 VDC |
| 1793173615 | 62 Count | 101 Count | 46 Count | 4.12 VDC | 0 VDC |
| 1793173015 | 55 Count | 90 Count | 42 Count | 4.12 VDC | 0 VDC |
| 1793172414 | 45 Count | 74 Count | 34 Count | 4.11 VDC | 0 VDC |
| 1793171813 | 36 Count | 62 Count | 28 Count | 4.13 VDC | 0 VDC |
| 1793171213 | 26 Count | 41 Count | 20 Count | 4.11 VDC | 0 VDC |
| 1793170612 | 19 Count | 31 Count | 15 Count | 4.12 VDC | 0 VDC |
| 1793170012 | 6 Count | 11 Count | 5 Count | 4.12 VDC | 0 VDC |
| 1793169411 | 632 Count | 1007 Count | 456 Count | 4.11 VDC | 0 VDC |
| 1793168810 | 619 Count | 983 Count | 446 Count | 4.12 VDC | 0 VDC |
| 1793168210 | 612 Count | 975 Count | 441 Count | 4.12 VDC | 0 VDC |
| 1793167609 | 599 Count | 953 Count | 431 Count | 4.11 VDC | 0 VDC |
| 1793167008 | 592 Count | 943 Count | 426 Count | 4.11 VDC | 0 VDC |
| 1793166540 | 591 Count | 943 Count | 426 Count | 4.12 VDC | 0 VDC |
| 1793165939 | 583 Count | 930 Count | 421 Count | 4.12 VDC | 0 VDC |
| 1793165339 | 577 Count | 915 Count | 417 Count | 4.1 VDC | 0 VDC |
| 1793127566 | 576 Count | 915 Count | 417 Count | 4.15 VDC | 0 VDC |
| 1793126966 | 567 Count | 903 Count | 410 Count | 4.14 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)