This is the latest recevied telemetry packets stored in our database for station/object EA5URX-7. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Voltage* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1781599768 | 4.15 VDC | 0 | 0 | 0 | 0 |
| 1781598833 | 4.15 VDC | 0 | 0 | 0 | 0 |
| 1781596501 | 4.15 VDC | 0 | 0 | 0 | 0 |
| 1781593755 | 4.15 VDC | 0 | 0 | 0 | 0 |
| 1781589436 | 4.15 VDC | 0 | 0 | 0 | 0 |
| 1781587961 | 4.15 VDC | 0 | 0 | 0 | 0 |
| 1781586666 | 4.15 VDC | 0 | 0 | 0 | 0 |
| 1781581757 | 4.15 VDC | 0 | 0 | 0 | 0 |
| 1781580025 | 4.15 VDC | 0 | 0 | 0 | 0 |
| 1781579393 | 4.15 VDC | 0 | 0 | 0 | 0 |
| 1781578379 | 4.15 VDC | 0 | 0 | 0 | 0 |
| 1781577179 | 4.15 VDC | 0 | 0 | 0 | 0 |
| 1781574593 | 4.15 VDC | 0 | 0 | 0 | 0 |
| 1781571341 | 4.15 VDC | 0 | 0 | 0 | 0 |
| 1781570454 | 4.15 VDC | 0 | 0 | 0 | 0 |
| 1781569133 | 4.15 VDC | 0 | 0 | 0 | 0 |
| 1781568332 | 4.15 VDC | 0 | 0 | 0 | 0 |
| 1781567494 | 4.15 VDC | 0 | 0 | 0 | 0 |
| 1781566675 | 4.15 VDC | 0 | 0 | 0 | 0 |
| 1781561869 | 4.15 VDC | 0 | 0 | 0 | 0 |
| 1781558298 | 4.15 VDC | 0 | 0 | 0 | 0 |
| 1781557136 | 4.15 VDC | 0 | 0 | 0 | 0 |
| 1781555364 | 4.15 VDC | 0 | 0 | 0 | 0 |
| 1781550448 | 4.15 VDC | 0 | 0 | 0 | 0 |
| 1781546854 | 4.15 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
Voltage: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)