This is the latest recevied telemetry packets stored in our database for station/object SP2GPU-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1767322023 | 435 Count | 229 Count | 229 Count | 4.17 VDC | 0 VDC |
| 1767321122 | 433 Count | 228 Count | 228 Count | 4.2 VDC | 0 VDC |
| 1767320221 | 431 Count | 227 Count | 227 Count | 4.21 VDC | 0 VDC |
| 1767319321 | 429 Count | 226 Count | 226 Count | 4.17 VDC | 0 VDC |
| 1767318420 | 427 Count | 225 Count | 225 Count | 4.22 VDC | 0 VDC |
| 1767317519 | 425 Count | 224 Count | 224 Count | 4.19 VDC | 0 VDC |
| 1767316618 | 423 Count | 223 Count | 223 Count | 4.17 VDC | 0 VDC |
| 1767315717 | 421 Count | 222 Count | 222 Count | 4.21 VDC | 0 VDC |
| 1767314816 | 419 Count | 221 Count | 221 Count | 4.21 VDC | 0 VDC |
| 1767313915 | 417 Count | 220 Count | 220 Count | 4.18 VDC | 0 VDC |
| 1767313014 | 415 Count | 219 Count | 219 Count | 4.18 VDC | 0 VDC |
| 1767312113 | 413 Count | 218 Count | 218 Count | 4.22 VDC | 0 VDC |
| 1767311212 | 411 Count | 217 Count | 217 Count | 4.2 VDC | 0 VDC |
| 1767310312 | 409 Count | 216 Count | 216 Count | 4.18 VDC | 0 VDC |
| 1767309411 | 407 Count | 215 Count | 215 Count | 4.21 VDC | 0 VDC |
| 1767308510 | 405 Count | 214 Count | 214 Count | 4.21 VDC | 0 VDC |
| 1767307609 | 403 Count | 213 Count | 213 Count | 4.17 VDC | 0 VDC |
| 1767306708 | 401 Count | 212 Count | 212 Count | 4.17 VDC | 0 VDC |
| 1767305807 | 399 Count | 211 Count | 211 Count | 4.21 VDC | 0 VDC |
| 1767304907 | 397 Count | 210 Count | 210 Count | 4.19 VDC | 0 VDC |
| 1767304006 | 395 Count | 209 Count | 209 Count | 4.18 VDC | 0 VDC |
| 1767303105 | 393 Count | 208 Count | 208 Count | 4.2 VDC | 0 VDC |
| 1767302204 | 391 Count | 207 Count | 207 Count | 4.21 VDC | 0 VDC |
| 1767301303 | 389 Count | 206 Count | 206 Count | 4.19 VDC | 0 VDC |
| 1767300402 | 387 Count | 205 Count | 205 Count | 4.23 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)