This is the latest recevied telemetry packets stored in our database for station/object SP2GPU-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1767709398 | 275 Count | 122 Count | 101 Count | 4.21 VDC | 0 VDC |
| 1767708497 | 273 Count | 121 Count | 100 Count | 4.21 VDC | 0 VDC |
| 1767707596 | 271 Count | 120 Count | 99 Count | 4.19 VDC | 0 VDC |
| 1767706696 | 269 Count | 119 Count | 98 Count | 4.22 VDC | 0 VDC |
| 1767705795 | 267 Count | 118 Count | 97 Count | 4.22 VDC | 0 VDC |
| 1767704894 | 265 Count | 117 Count | 96 Count | 4.21 VDC | 0 VDC |
| 1767703993 | 263 Count | 116 Count | 95 Count | 4.22 VDC | 0 VDC |
| 1767703092 | 261 Count | 115 Count | 94 Count | 4.17 VDC | 0 VDC |
| 1767702191 | 259 Count | 114 Count | 93 Count | 4.17 VDC | 0 VDC |
| 1767701290 | 257 Count | 113 Count | 92 Count | 4.2 VDC | 0 VDC |
| 1767700390 | 255 Count | 112 Count | 91 Count | 4.22 VDC | 0 VDC |
| 1767699489 | 253 Count | 111 Count | 90 Count | 4.18 VDC | 0 VDC |
| 1767698588 | 251 Count | 110 Count | 89 Count | 4.21 VDC | 0 VDC |
| 1767697687 | 249 Count | 109 Count | 88 Count | 4.18 VDC | 0 VDC |
| 1767696786 | 247 Count | 108 Count | 87 Count | 4.22 VDC | 0 VDC |
| 1767695886 | 245 Count | 107 Count | 86 Count | 4.21 VDC | 0 VDC |
| 1767694985 | 243 Count | 106 Count | 85 Count | 4.22 VDC | 0 VDC |
| 1767694084 | 242 Count | 106 Count | 85 Count | 4.19 VDC | 0 VDC |
| 1767693183 | 241 Count | 106 Count | 85 Count | 4.18 VDC | 0 VDC |
| 1767692282 | 240 Count | 106 Count | 85 Count | 4.19 VDC | 0 VDC |
| 1767691381 | 239 Count | 106 Count | 85 Count | 4.19 VDC | 0 VDC |
| 1767690480 | 236 Count | 100 Count | 83 Count | 4.21 VDC | 0 VDC |
| 1767689579 | 233 Count | 91 Count | 81 Count | 4.19 VDC | 0 VDC |
| 1767688679 | 231 Count | 88 Count | 80 Count | 4.17 VDC | 0 VDC |
| 1767687776 | 227 Count | 79 Count | 77 Count | 4.21 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)