This is the latest recevied telemetry packets stored in our database for station/object DG3EAZ-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Voltage* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1763067832 | 3.49 | 0 | 0 | 0 | 0 |
| 1763066929 | 3.48 | 0 | 0 | 0 | 0 |
| 1763066026 | 3.48 | 0 | 0 | 0 | 0 |
| 1763065123 | 3.46 | 0 | 0 | 0 | 0 |
| 1763064220 | 3.47 | 0 | 0 | 0 | 0 |
| 1763063317 | 3.46 | 0 | 0 | 0 | 0 |
| 1763062414 | 3.43 | 0 | 0 | 0 | 0 |
| 1763061511 | 3.43 | 0 | 0 | 0 | 0 |
| 1763060608 | 3.42 | 0 | 0 | 0 | 0 |
| 1763059705 | 3.42 | 0 | 0 | 0 | 0 |
| 1763058802 | 3.42 | 0 | 0 | 0 | 0 |
| 1763056996 | 3.4 | 0 | 0 | 0 | 0 |
| 1763056093 | 3.38 | 0 | 0 | 0 | 0 |
| 1763055190 | 3.33 | 0 | 0 | 0 | 0 |
| 1763053367 | 2.92 | 0 | 0 | 0 | 0 |
| 1763053348 | 3.16 | 0 | 0 | 0 | 0 |
| 1763052273 | 2.91 | 0 | 0 | 0 | 0 |
| 1763051370 | 3.08 | 0 | 0 | 0 | 0 |
| 1763050466 | 3.2 | 0 | 0 | 0 | 0 |
| 1763049562 | 3.25 | 0 | 0 | 0 | 0 |
| 1763048658 | 3.28 | 0 | 0 | 0 | 0 |
| 1763047754 | 3.29 | 0 | 0 | 0 | 0 |
| 1763046850 | 3.31 | 0 | 0 | 0 | 0 |
| 1763045946 | 3.33 | 0 | 0 | 0 | 0 |
| 1763045042 | 3.36 | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
Voltage: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)