This is the latest recevied telemetry packets stored in our database for station/object SQ5K-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1764013725 | 389 Count | 201 Count | 13 Count | 3.45 VDC | 0 VDC |
| 1764011924 | 388 Count | 201 Count | 13 Count | 3.42 VDC | 0 VDC |
| 1764010124 | 387 Count | 201 Count | 13 Count | 3.47 VDC | 0 VDC |
| 1764008323 | 386 Count | 201 Count | 13 Count | 3.51 VDC | 0 VDC |
| 1764006522 | 385 Count | 201 Count | 13 Count | 3.53 VDC | 0 VDC |
| 1764004722 | 384 Count | 200 Count | 13 Count | 3.54 VDC | 0 VDC |
| 1764002921 | 383 Count | 200 Count | 13 Count | 3.52 VDC | 0 VDC |
| 1764001120 | 382 Count | 199 Count | 13 Count | 3.59 VDC | 0 VDC |
| 1763999329 | 381 Count | 199 Count | 13 Count | 3.61 VDC | 0 VDC |
| 1763997528 | 380 Count | 199 Count | 13 Count | 3.59 VDC | 0 VDC |
| 1763995728 | 379 Count | 199 Count | 13 Count | 3.63 VDC | 0 VDC |
| 1763993927 | 378 Count | 199 Count | 13 Count | 3.63 VDC | 0 VDC |
| 1763992126 | 377 Count | 199 Count | 13 Count | 3.69 VDC | 0 VDC |
| 1763990326 | 376 Count | 199 Count | 13 Count | 3.7 VDC | 0 VDC |
| 1763988525 | 375 Count | 199 Count | 13 Count | 3.71 VDC | 0 VDC |
| 1763986724 | 374 Count | 199 Count | 13 Count | 3.68 VDC | 0 VDC |
| 1763984924 | 373 Count | 199 Count | 13 Count | 3.67 VDC | 0 VDC |
| 1763983123 | 372 Count | 199 Count | 13 Count | 3.73 VDC | 0 VDC |
| 1763981322 | 371 Count | 199 Count | 13 Count | 3.74 VDC | 0 VDC |
| 1763979522 | 370 Count | 199 Count | 13 Count | 3.74 VDC | 0 VDC |
| 1763979507 | 369 Count | 199 Count | 13 Count | 3.74 VDC | 0 VDC |
| 1763977707 | 368 Count | 199 Count | 13 Count | 3.71 VDC | 0 VDC |
| 1763975906 | 367 Count | 199 Count | 13 Count | 3.72 VDC | 0 VDC |
| 1763974105 | 366 Count | 199 Count | 13 Count | 3.77 VDC | 0 VDC |
| 1763972305 | 365 Count | 199 Count | 13 Count | 3.77 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)