This is the latest recevied telemetry packets stored in our database for station/object PD5N-6. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Celsius* | Rel_Hum* | Atm_Press* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1774874405 | 20.3 C | 38.31 % | 1017.25 hPa | 0 | 0 |
| 1774874324 | 20.4 C | 37.4 % | 1017.5 hPa | 0 | 0 |
| 1774874288 | 20.5 C | 36.09 % | 1018.75 hPa | 0 | 0 |
| 1774874253 | 20.7 C | 35.65 % | 1018.38 hPa | 0 | 0 |
| 1774874205 | 20.7 C | 35.65 % | 1018.88 hPa | 0 | 0 |
| 1774874168 | 20.9 C | 36.34 % | 1018.88 hPa | 0 | 0 |
| 1774874044 | 21 C | 40.29 % | 1017.88 hPa | 0 | 0 |
| 1774873700 | 21.3 C | 37.76 % | 1018.63 hPa | 0 | 0 |
| 1774872797 | 22.2 C | 38 % | 1013.25 hPa | 0 | 0 |
| 1774871875 | 22.8 C | 37.8 % | 1016.25 hPa | 0 | 0 |
| 1774871616 | 23.5 C | 37.44 % | 1014.13 hPa | 0 | 0 |
| 1774870966 | 21.6 C | 39.65 % | 1012.63 hPa | 0 | 0 |
| 1774870939 | 21.7 C | 39.02 % | 1013.25 hPa | 0 | 0 |
| 1774870915 | 21.7 C | 39.02 % | 1013.38 hPa | 0 | 0 |
| 1774870796 | 21.7 C | 38.92 % | 1013.38 hPa | 0 | 0 |
| 1774870691 | 21.7 C | 38.82 % | 1013 hPa | 0 | 0 |
| 1774870664 | 21.7 C | 38.82 % | 1013.38 hPa | 0 | 0 |
| 1774870640 | 21.7 C | 39.44 % | 1013.88 hPa | 0 | 0 |
| 1774870582 | 21.7 C | 39.36 % | 1013.25 hPa | 0 | 0 |
| 1774870558 | 21.7 C | 39.36 % | 1014 hPa | 0 | 0 |
| 1774870434 | 21.7 C | 39.27 % | 1016.63 hPa | 0 | 0 |
| 1774870410 | 21.7 C | 39.27 % | 1014.63 hPa | 0 | 0 |
| 1774870180 | 21.6 C | 39.08 % | 1013.13 hPa | 0 | 0 |
| 1774870156 | 21.6 C | 39.49 % | 1013.13 hPa | 0 | 0 |
| 1774870132 | 21.6 C | 39.49 % | 1013.13 hPa | 0 | 0 |
*Used Equation Coefficients:
Celsius: 0, 0.1, -50
Rel_Hum: 0, 0.01, 0
Atm_Press: 0, 0.125, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)