This is the latest recevied telemetry packets stored in our database for station/object SP2GPU-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1789247261 | 113 Count | 113 Count | 104 Count | 4.23 VDC | 0 VDC |
| 1789246360 | 110 Count | 111 Count | 102 Count | 4.26 VDC | 0 VDC |
| 1789245459 | 106 Count | 106 Count | 99 Count | 4.23 VDC | 0 VDC |
| 1789244559 | 103 Count | 101 Count | 97 Count | 4.22 VDC | 0 VDC |
| 1789243657 | 99 Count | 95 Count | 94 Count | 4.21 VDC | 0 VDC |
| 1789242756 | 89 Count | 85 Count | 85 Count | 4.22 VDC | 0 VDC |
| 1789241855 | 77 Count | 74 Count | 74 Count | 4.25 VDC | 0 VDC |
| 1789240953 | 57 Count | 55 Count | 55 Count | 4.21 VDC | 0 VDC |
| 1789240052 | 33 Count | 32 Count | 32 Count | 4.25 VDC | 0 VDC |
| 1789239151 | 20 Count | 20 Count | 20 Count | 4.23 VDC | 0 VDC |
| 1789238251 | 961 Count | 1001 Count | 781 Count | 4.26 VDC | 0 VDC |
| 1789237350 | 955 Count | 996 Count | 776 Count | 4.22 VDC | 0 VDC |
| 1789236449 | 949 Count | 991 Count | 771 Count | 4.27 VDC | 0 VDC |
| 1789235548 | 943 Count | 986 Count | 766 Count | 4.27 VDC | 0 VDC |
| 1789234647 | 924 Count | 968 Count | 748 Count | 4.26 VDC | 0 VDC |
| 1789233746 | 915 Count | 960 Count | 740 Count | 4.23 VDC | 0 VDC |
| 1789232845 | 900 Count | 945 Count | 726 Count | 4.24 VDC | 0 VDC |
| 1789231944 | 893 Count | 939 Count | 720 Count | 4.26 VDC | 0 VDC |
| 1789231044 | 882 Count | 929 Count | 710 Count | 4.22 VDC | 0 VDC |
| 1789230143 | 877 Count | 925 Count | 706 Count | 4.23 VDC | 0 VDC |
| 1789229242 | 873 Count | 922 Count | 703 Count | 4.21 VDC | 0 VDC |
| 1789228341 | 869 Count | 919 Count | 700 Count | 4.25 VDC | 0 VDC |
| 1789227440 | 866 Count | 917 Count | 698 Count | 4.24 VDC | 0 VDC |
| 1789226539 | 863 Count | 915 Count | 696 Count | 4.23 VDC | 0 VDC |
| 1789225638 | 860 Count | 913 Count | 694 Count | 4.22 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)