This is the latest recevied telemetry packets stored in our database for station/object SP2GPU-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1786713498 | 267 Count | 233 Count | 206 Count | 4.24 VDC | 0 VDC |
| 1786712596 | 263 Count | 230 Count | 203 Count | 4.23 VDC | 0 VDC |
| 1786711695 | 260 Count | 228 Count | 201 Count | 4.26 VDC | 0 VDC |
| 1786710794 | 240 Count | 209 Count | 182 Count | 4.22 VDC | 0 VDC |
| 1786709893 | 235 Count | 205 Count | 178 Count | 4.22 VDC | 0 VDC |
| 1786708993 | 231 Count | 202 Count | 175 Count | 4.24 VDC | 0 VDC |
| 1786708092 | 227 Count | 199 Count | 172 Count | 4.26 VDC | 0 VDC |
| 1786707191 | 213 Count | 186 Count | 159 Count | 4.23 VDC | 0 VDC |
| 1786706290 | 210 Count | 184 Count | 157 Count | 4.25 VDC | 0 VDC |
| 1786705389 | 207 Count | 182 Count | 155 Count | 4.25 VDC | 0 VDC |
| 1786704488 | 201 Count | 177 Count | 150 Count | 4.25 VDC | 0 VDC |
| 1786703587 | 189 Count | 166 Count | 139 Count | 4.21 VDC | 0 VDC |
| 1786702687 | 183 Count | 161 Count | 134 Count | 4.21 VDC | 0 VDC |
| 1786701786 | 168 Count | 147 Count | 120 Count | 4.24 VDC | 0 VDC |
| 1786700885 | 166 Count | 146 Count | 119 Count | 4.26 VDC | 0 VDC |
| 1786699984 | 164 Count | 145 Count | 118 Count | 4.22 VDC | 0 VDC |
| 1786699083 | 150 Count | 132 Count | 105 Count | 4.23 VDC | 0 VDC |
| 1786698182 | 144 Count | 127 Count | 100 Count | 4.26 VDC | 0 VDC |
| 1786697281 | 137 Count | 121 Count | 94 Count | 4.25 VDC | 0 VDC |
| 1786696381 | 135 Count | 120 Count | 93 Count | 4.23 VDC | 0 VDC |
| 1786695480 | 133 Count | 119 Count | 92 Count | 4.25 VDC | 0 VDC |
| 1786694579 | 123 Count | 110 Count | 83 Count | 4.25 VDC | 0 VDC |
| 1786693678 | 121 Count | 109 Count | 82 Count | 4.26 VDC | 0 VDC |
| 1786692777 | 119 Count | 108 Count | 81 Count | 4.26 VDC | 0 VDC |
| 1786691876 | 117 Count | 107 Count | 80 Count | 4.22 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)